March 10, 2019

Lorch, Schmidt & Co Watchmakers Lathe

This listing is for a “Lorch, Schmidt & Co” Watchmakers Lathe 6 mm. Bed length 245 mm , diameter-20 mm. Tailstock with spindle diameter- 7 mm with male and female ends. The Lathe has a tool rest , carrier chuck, brass wax chucks with steel adaptor. 28 collets ## 3; 0.4; 0.6; 0.8; 9; 10; […]

February 2, 2019

Lorch, Schmidt & Co Watchmakers Lathe

This listing is for a “Lorch, Schmidt & Co” Watchmakers Lathe 6 mm. Bed length 245 mm , diameter-20 mm. Tailstock with spindle diameter- 7 mm with male and female ends. The Lathe has a tool rest , carrier chuck, brass wax chucks with steel adaptor. 28 collets ## 3; 0.4; 0.6; 0.8; 9; 10; […]

January 18, 2019

Lorch Schmidt & Co watchmakers lathe

LORCH SCHMIDT & CO. Vintage 6mm watchmakers lathe in the box with many original extras including. Ready to use, 100% working condition. The bakelite button on the end of the drawbar is broken, this does not affect the functionality. (look on the right hand side of the box – it is laying horizontal). The total […]

October 11, 2018

Lorch watchmaker lathe 6 jaw chuck on a 6mm collet

The rear of the chuck is inscribed L. This item was obtained from an estate sale and was probably produced around the middle of the 20th century. The chuck is clean and in good condition as can be seen from the pictures – it is in good working order. The chuck has been checked and […]

September 29, 2018

Lorch Schmidt & Co. Watchmakers Lathe Lots of Extra Tools & Fixtures 6mm

Lorch & Schmidt Watchmakers lathe with an 8 inch bed. The bed is not marked but the tool rest, tailstock, and head are marked Lorch Schmidt. The tools outside the box are extra and a great selection and some are duplicate of what is in the box. Pivot tools, collets of a lot of sizes, […]

September 9, 2018

Lorch Schmidt & Co. Watchmaker Lathe Original Box 6mm

Nice usable Lorch lathe with 6mm setup. Lathe head stock has “triumpe 4″ (hard to red) stamped in as well as the name Lorch Schmidt & Co. There are 18 collets/chucks with the lathe; 3; 4; 4; 5; 6; 6 7; 8; 8; 10; 12; 13; 14; 18; 19; 20; 20; 21; 22. They are […]

May 30, 2018

Lorch Watchmakers Watch Makers Lathes Boxed Set Lathe

PAIR OF LORCH WATCHMAKERS LATHES IN ORIGINAL BOX. 32 COLLETS, 5 RING COLLETS AND OTHER BITS AND BOBS. GOOD USED CONDITION WITH SIGNS OF AGE, STILL ACCURATE AND READY FOR WORK. I THINK ITS 6.5 COLLET SIZE. The item “LORCH WATCHMAKERS WATCH MAKERS LATHES BOXED SET LATHE” is in sale since Monday, May 28, 2018. […]

April 13, 2018

Lorch, Schmidt & Co Watchmakers Lathe

This listing is for a “Lorch, Schmidt & Co” Watchmakers Lathe 6 mm. Bed length 245 mm , diameter-20 mm. Tailstock with spindle diameter- 7 mm with male and female ends. The Lathe has a tool rest , carrier chuck, brass wax chucks with steel adaptor. 28 collets ## 3; 0.4; 0.6; 0.8; 9; 10; […]

February 4, 2018

Lorch LAN Vintage Watchmakers Precision Lathe 10mm Watchmakers tool

All My auctions are directed only for Watchmakers or for Persons that have the knowledge of Horology. Thank You & good Luck. Lorch LAN 10mm Vintage fifties precision lathe with screwcutting by changewheels and a leadscrew. International Buyers (outside EEC) please note. A / Australia & Worldwide. No warranties are expressed or implied. In case […]

October 19, 2017

Lorch watchmaker lathe vertical mill / vertical support

Lorch watchmaker lathe vertical mill. It’s a 6mm Lorch, Schmidt & Co. Accessories (original xy slide table number 30, please check photo). PLEASE CHECK VERY CAREFULLY! Having a lot of rust and scratch please check carefully. It’s a old previously owned. Have scratch on surface. PLEASE CHECK VERY CAREFULLY. The item “Lorch watchmaker lathe vertical […]

1 2 3