For your consideration is a used mostly made by Levin micro-machining center. The set can be setup as the following. Compact lathe with 3C headstock. + adapter and drawbar for 10mm collets, Metric cross slide, Rack and pinion 10mm collet tailstock. They are all mounted on the 12 bed on aluminum Borel base. The cross slide is fitted with Quick change tool post and two tool holders. Radius turning lathe with. Max radius of 1.0 I think. Screw or thread cutting attachment. With complete set of gears including 127 tooth translation gear which allows you to cut Imperial treads with the Metric slide. The attachment is set up to be driven with a crank handle mounted at the rear of the headstock for ultimate control, but it can also be driven by the 1/11 HP brushless Bodine motor and The SRS Bodine speed controller. If small diameters are worked. Dividing attachment with set of gears. These are used on the included 10mm Ball Bearing Open style headstock. Self-powered Micro milling and drilling attachment. With 2000-35,000 Rpm speed range. This one comes with 1/8 and 3/32 collets thus accepting wide variety of jewelers drills and milling cutters. It is mounted on top of the cross slide via removable clamp. The unit is made by NSK. With the mounting clamp removed the NSK. Hand-piece with micromotor becomes a precision HAND-HELD grinding, drilling and polishing unit which can use myriad jewelers wheels, drills and cutters with 1/8 or 3/32 shanks. The speed control unit is 110v but can be used with 220 if step up transformer is used. It is highly sophisticated control as you can adjust the speed, torque, Start delay, acceleration and deceleration. It will run Bodine brushless motors up to 3/8HP (an internal fuse has to be replaced and 3 DIP switches flipped) Motors of 1/8, 1/4, 1/5 and 3/8 HP are available. The current motor installed is 1/11 HP. I can provide the manual for this control in a digital or printed form. The item “Levin Watchmakers Jewelers lathe Thread Screw Milling Divide Grinding 3C 10mm” is in sale since Wednesday, October 28, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Tools & Repair Kits”. The seller is “vladlek” and is located in Canoga Park, California. This item can be shipped to United States.
- Brand: Levin
- Type of Tool: Lathe