For your consideration is a used mostly made by Levin micro-machining center. The set can be setup as the following. Compact lathe with 3C headstock. + adapter and drawbar for 10mm collets, Metric cross slide, Rack and pinion 10mm collet tailstock. They are all mounted on the bed of the old-style Radius turning lathe which is designed to be converted to a compact standard lathe. The cross slide is fitted with Quick change tool post and three tool holders. Radius turning lathe with. Max radius of 1.0 I think. Screw or thread cutting lathe. With complete set of gears including 127 tooth translation gear which allows you to cut Imperial treads with the Metric slide. The attachment is set up to be driven with a crank handle mounted at the rear of the headstock for ultimate control, but it can also be driven by the 1/11 HP brushless Bodine motor and The SRS Bodine speed controller. If small diameters are worked. Dividing attachment with set of gears. These are mounted on the included 10mm Ball Bearing headstock. Self-powered Micro milling and drilling attachment. With 2000-35,000 Rpm speed range. This one comes with 1/8 and 3/32 collets thus accepting wide variety of jewelers drills and milling cutters. It is mounted on top of the cross slide via removable clamp. The unit is made by NSK. With the mounting clamp removed the NSK. Hand-piece with micromotor becomes a precision HAND-HELD grinding, drilling and polishing unit which can use myriad jewelers wheels, drills and cutters with 1/8 or 3/32 shanks. Seeing the smallest details is possible with the trinocular stereo zoom microscope. A camera can be mounted on for video recording or photos. I will post more photos in the next few days showing the different setup possibilities. The speed control unit is 110v but can be used with 220 if step up transformer is used. It is highly sophisticated control as you can adjust the speed, torque. Start delay, acceleration and deceleration. It will run Bodine brushless motors up to 3/8HP (an internal fuse has to be replaced and 3 DIP switches flipped) Motors of 1/8, 1/4, 1/5 and 3/8 HP are available. The current motor installed is 1/11 HP. I can provide the manual for this control in a digital or printed form. Only 3 collets are included in this package to retain the drawbars in the headstocks and the 3c to D adapter. One 3C and two 10mm. Unfortunately I do not have any other collets. However I have some 1/8 shank solid carbide milling cutters (end and ball mills) which I can include. Also I have a handful of unused grinding and polishing wheels brushes etc. For the grinding spindle/micromotor. The item “Levin Watchmakers Jewelers lathe Thread Screw Milling Divide Grinding 3C 10mm” is in sale since Friday, October 23, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Tools & Repair Kits”. The seller is “vladlek” and is located in Canoga Park, California. This item can be shipped to United States.

• Brand: Levin
• Type of Tool: Lathe