September 14, 2021

3C Collet Closer With Nose Piece lathe 3 c south bend rivett

So well made there is even a knurl around the hand wheel. The tube from were it would sit. The lathe to the end is 10 15/16 I measured it with my tape so dam close but. Be a fraction off. PLEASE ASK ANY QUESTIONS YOU MIGHT HAVE. I JUST WANT EVERYONE TO BE HAPPY! […]


September 1, 2021

LeBLOND Regal 19¼ x 54 Manual Engine Lathe 5C Collet Nose, KDK Tool Post

LeBLOND Regal 19¼” x 54″ Manual Engine Lathe Model 17E5. In good working condition. Available to view under power. Located in Acton, Ca. 5C Collet Spindle Nose. KDK Quick Change Tool Post with tool holders. Swing Over Bed & Carriage Wings. Swing Over Cross Slide. Spindle Speed Range (12). 25 to 1000 rpm. Spindle Size […]


August 31, 2021

Vintage Boxed Set Watchmakers 6mm Collet LATHE F. LORCH Ring/Step Chucks, Jacot

From an old clockmakers workshop clearance.. This is a nice lathe by F. LORCH with the ROTATING ANGLE HEAD (has division holes to pulley rim). “D” shape Geneva type bed. Has many items in original fitted wooden box, including. Lever Drilling tailstock fitting. Filling “T” rest, plus two standard ones. Some Ring and Step chucks […]


August 29, 2021

Used Haas SL-20 CNC Turning Center Lathe Tailstock Collet Chuck Tool Setter 2000

Standard Chuck Size (Not Included)……………………………………………………… Machine Dims126.5″L x 74″W x 72H. 3.5 Floppy Drive. Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are extra costs. All items are subject to prior sale. Established 2009, 520 Machinery Sales is a full service machine […]


August 20, 2021

Levin lathe 3C or 10mm collet holding tailstock heavy duty cross slide compound

Up for sale is this Levin 3C lathe. It comes with 3C to D (10mm) adapter and drawbar. Included in the listing are: Lathe bed, headstock, tailstock, Heavy duty cross slide, Levin tool post and four holders, 3C to d collet adapter, 3C drawbar, 10mm drawbar, Chip tray. Motor pulley guard for under-mounted motors. Condition […]


May 21, 2021

Levin Collet Set for Watchmaker’s or Jeweler’s 8mm WW Lathe

This is a set of Levin collets for a watchmaker’s 8mm WW lathe. Collets #2 through 50 are all genuine Levin except for #18 and #33. #18 has a larger opening than standard #18 which should be 1.8mm. Also includes #’s 55, 60, and 64 of various brands. Includes wheel chucks #’s 1 through 5. […]

1 2 10