9-Inch-South-Bend-Lathe-With-Tooling-Tool-Post-Grinder-Thread-Cutting-01-ovj

April 4, 2021

9 Inch South Bend Lathe With Tooling Tool Post Grinder Thread Cutting

9 Inch South Bend Lathe With Tooling Tool Post Grinder Thread Cutting. This is a fantastically great vintage South Bend metal lathe. It has a 9 inch swing and a 36-inch long bed. Included is a wide assortment of chucks and a tool post grinder. It does have some wear but is still capable of […]

Change-Gear-Set-for-Watchmakers-Lathe-Screw-Cutting-Attachment-long-drive-gear-01-kux

February 10, 2021

Change Gear Set for Watchmakers Lathe Screw Cutting Attachment, long drive gear

Change Gear Set for Watchmakers Lathe Screw Cutting Attachment with 60 Tooth drive gear sized to fit Levin Ball Bearing Headstock spindles (open style BB Headstock with pulley visible in center of Headstock). Change gear tooth counts are 36, 40, 44, 48, 50, 54, 60, 72, 84, 96, 100. Gears are 48 pitch, 14.5 degree […]

Vintage-Derbyshire-Screw-Cutting-Attachment-Tool-for-Watchmakers-Lathe-01-yupi

February 2, 2021

Vintage Derbyshire Screw Cutting Attachment Tool for Watchmakers Lathe

Here is a vintage Derbyshire screw cutting attachment for the watchmaker’s lathe. All pieces pictured are included. Please see photos for more detail. The item “Vintage Derbyshire Screw Cutting Attachment Tool for Watchmakers Lathe” is in sale since Saturday, January 30, 2021. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools […]

W-F-John-Barnes-5-Metal-Lathe-Velocipede-With-Screw-Cutting-01-ju

January 24, 2021

W. F. & John Barnes #5 Metal Lathe Velocipede With Screw Cutting

& John Barnes #5 Metal Lathe Velocipede With Screw Cutting. Lathe is located in beautiful Port Orford Oregon 97465. Lathe has been lovingly stored in a conditioned garage for 20 years by owner. Photo 3 shows the only damage. Unfortunately original seat and post are missing-would be a fun project to replace them. Everything moves […]

2018-19-Haas-TL2-Lathe-Only-71-cutting-Hours-Loaded-with-options-and-tooling-01-rwo

December 31, 2020

2018/19 Haas TL2 Lathe Only 71 cutting Hours! Loaded with options and tooling

2018/19 Haas TL2 Lathe Only 71 cutting Hours! Loaded with options and tooling. 2018/19 Haas TL2 Lathe Only 71 Hours! Swing Over Front Apron.. Swing Over Cross Slide11. Rapid Feed Rate X and Z Axis. Video Available, Inspections are welcomed and encouraged. We are proud to be a member of the MDNA. The item “2018/19 […]

Metal-working-JET-lathe-9-X-20-Belt-Drive-Bench-With-Cutting-Tools-And-many-01-owb

December 23, 2020

Metal working JET lathe 9 X 20 Belt Drive Bench With Cutting Tools And many

9″x20″ jet belt drive bench lathe, with all cutting tools and all accessories shown in pictures included lathe is in Used condition, many of the cutting tools have never been used. The item “Metal working JET lathe 9 X 20 Belt Drive Bench With Cutting Tools And many” is in sale since Saturday, October 24, […]

Levin-Watchmakers-Jewelers-lathe-Radius-cutting-10mm-D-headstock-01-vu

November 19, 2020

Levin Watchmakers Jewelers lathe Radius cutting 10mm D headstock

For your consideration is a used radius cutting lathe made by Levin. 10mm D style headstock. The lathe is the very rare earlier version with Solid bed and Slide which can accept tailstock and standard two or three deck cross slide. The item “Levin Watchmakers Jewelers lathe Radius cutting 10mm D headstock” is in sale […]

Levin-Watchmakers-Jewelers-lathe-Thread-Screw-cutting-3C-10-cross-slide-compound-01-dei

November 18, 2020

Levin Watchmakers Jewelers lathe Thread Screw cutting 3C 10 cross slide compound

For your consideration is a used made by Levin thread or Screw cutting lathe. The set includes the following. 18: lathe bed with 3C headstock. + adapter and drawbar for 10mm collets, Metric cross slide, Rack and pinion 10mm collet tailstock. The cross slide is fitted with Quick change tool post and two tool holders. […]

1 2 16