Levin-lathe-3C-or-10mm-collet-holding-tailstock-heavy-duty-cross-slide-compound-01-zuv

August 20, 2021

Levin lathe 3C or 10mm collet holding tailstock heavy duty cross slide compound

Up for sale is this Levin 3C lathe. It comes with 3C to D (10mm) adapter and drawbar. Included in the listing are: Lathe bed, headstock, tailstock, Heavy duty cross slide, Levin tool post and four holders, 3C to d collet adapter, 3C drawbar, 10mm drawbar, Chip tray. Motor pulley guard for under-mounted motors. Condition […]

Levin-8mm-Collet-Holding-Tailstock-for-Watchmaker-Lathe-01-yk

May 25, 2020

Levin 8mm Collet Holding Tailstock for Watchmaker Lathe

Levin 8mm Collet Holding Tailstock for Watchmaker Lathe. These were originally plated but plating was very poor, so I decided to sand and paint with a coat of Levin grey lacquer. Assembled with new 8mm collet holding spindle/runner with internal index pin, all new drawbar, eccentric mounting lever, spindle locking ring, eccentric spindle locking lever […]

Watchmakers-jewelers-8mm-lathe-Tailstock-With-collet-holding-drawbar-01-uw

July 17, 2019

Watchmakers jewelers 8mm lathe. Tailstock With collet holding drawbar

As pictured 8mm lathe tailstock with collet holding drawbar, good plating is in very good used condition. Came with a Moseley lathe bed will fit other 8mm lathe beds.. Will answer questions, or additional pictures. Track Page Views With. Auctiva’s FREE Counter. The item “Watchmakers jewelers 8mm lathe. Tailstock With collet holding drawbar” is in […]

Moseley-Marshall-Watchmakers-Jewelers-Lathe-s-Matching-Collet-Holding-Tailstock-01-rk

May 7, 2019

Moseley Marshall Watchmakers Jewelers Lathe #s Matching Collet Holding Tailstock

Moseley Marshall watchmakers jewelers lathe with RARE Micrometer tail-stock. Hard to find with numbers matching bed, head stock and tail stock (28024). Head stock has no cracks in the pulley, bearings turn smoothly and bed lock includes the indexing pin. Head stock uses Moseley long collets. Rare Micrometer adjustable collet holding tail stock slides easily. […]

April 14, 2018

Levin Lathe with collet holding tail stock 8MM

Levin watch makers lathe with collet holding tail stock. Slight wear on the plating on one place onn the bed. As a retired inspector from a manufacturing company in Rockford Illinois.. I measured the bed for wear setting the bottom flats on a pair of 1 2 3 blocks. Then using a dial indicator weasuring […]

January 24, 2018

Levin 8mm Watchmakers Lathe with Motor and Collet Holding Tailstock

This is a nice clean Levin Watchmakers Lathe. It has the collect holding and adjustable tailstock. It comes with a Borel base and strong running Watchcraft Motor. The lathe is in good condition. The headstock was dis-assembled, cleaned and oiled. The headstock bearings are in very good condition. There are no chips in the headstock […]

1 2