June 2, 2022
Geminis Model GE-650 Lathe. Swing Over Ways 26? Swing in Gap 33? Swing Over Cross-Slide 15 1/4? Distance Between Centers 80? Spindle Hole 3 3/8? Motor 230/460 3 phase 11 kw / 14.75 hp. (18) Speeds from 13-1000 rpm. 6 Jaw Adjust-Tru Chuck with both jaw set & key. 4 Jaw Independent Chuck with key. […]
October 12, 2018
Clausing Colchester 13 Gap Bed lathe with a Newall DRO, import toolpost & holders, and 3 & 4 jaw chcuks. A video is up on youtube if you search for video by Mullin Machinery. This lathe has a top speed of 2500 rpm and is smooth and comfortable to run. PLEASE CHECK MY OTHER ITEMS. […]
October 25, 2017
Clausing Colchester 13×40 lathe with a Buck 3jaw chuck, 4 jaw chuck, steady rest, Aloris toolpost & holders, tailstock chuck, and live center. Ways are in very good shape. In our 15,100 square foot warehouse, we stock a large and diverse selection of metalworking machinery, parts, and tooling for both machine shops and fabrication shops. […]
July 20, 2017
13/18 x 38 Supermax Gap Bed Engine Lathe. 1987 W/ IN/MM Threading, Steady Rest. See a video of the Saw running at the below link. Swing Over the Bed.. Swing Over the Gap. Swing over the Carriage. W/ Tailstock over hang…………………………………………………. Spindle Bore 1.5. 220 Volt/ 3 PH. Tailstock Spindle Taper #3 MT Taper. Tailstock […]
June 20, 2017
13/18 x 38 Supermax Gap Bed Engine Lathe. 1987 W/ IN/MM Threading, Steady Rest. See a video of the Saw running at the below link. Swing Over the Bed.. Swing Over the Gap. Swing over the Carriage. W/ out live center. Spindle Bore 1.5. 220 Volt/ 3 PH. Tailstock Spindle Taper #3 MT Taper. Tailstock […]
May 12, 2017
Jet lathe 16″ swing with a 60″ bed. The machine includes both 3 jaw chuck. The machine has a coolant pump and inch and metric threading capabilities. The spindle has a 3 1/4 through hole. The machine is stored inside in Miamitown, OH 45041. The lathe is 3 phase 220/440 volts, 5.5 kw or horse […]
April 15, 2017
Jet lathe 16″ swing with a 60″ bed. The machine includes both 3 & 4 jaw chucks, steady rest and a face plate. The features include a coolant pump, inch and metric threading capabilities. The spindle has a 3 1/4 through hole, so you could machine a large shaft and thread it inch or metric […]