October 3, 2016

Atlas Model Qc54 Metal Lathe With Accessories And Tooling

This Atlas Lathe is a model QC54 which will swing 6″ over the carriage or 10″ over the ways with 36 between centers. It has 8 speeds in belt drive and 8 speeds in back gears. It has a quick change gear box. It has seen little use and the ways show no wear. Everything […]

September 29, 2016

Powermatic Model 90 Gap Bed Lathe

Powermatic Model 90 Gap Bed Lathe. This lathe has a 1hp 3 phase motor that is now attached to an inverter drive that allows it to run on 220V single phase power. The inverter also makes thas lathe infinitely variable in speed! The lathe comes with four 6″ faceplates, five 3-1/4″ faceplates a spur drive […]

September 28, 2016

Vintage Dumore No 14 Tom Thumb Tool Post GrindeR Model 8096-240, Used CASE ACCS

GREAT LITTLE MACHINIST GRINDER , DUMORE No. HAS ORIGINAL CARRYING CASE, MARKED RED BOX WITH ACCS, EXTRA BELT. ALSO NUMEROUS OTHER ACCS. WHEELS , WRENCHES, ORIGINAL BALL BEARING OIL CAN(EMPTY)(ONE WRENCH IS A FORD GENERATOR WRENCH). WORKS FINE I LET RUN ABOUT FIVE MINUTES, RAN FINE. The item “Vintage Dumore No 14 Tom Thumb Tool […]

September 23, 2016

MACHINIST TOOL LATHE Logan Model 200 Lathe 10 Swing

Logan model 200 Lathe. Removed from a working shop. Will need mounted on a bench. Motor runs, main leather drive belt broke. Gear on headstock has two BROKEN teeth(easy fix, I think you can just run low speed without it). All the screw feed gears are ok, included are extras. Screw feed apron is in […]

September 19, 2016

Hardinge Model HLV-H Precision Tool Makers Lathe

You are looking at. Used – Hardinge Model HLV-H Precision Tool Makers Lathe. Motor Driven with 2-Speed, 3/60/230 Volt Variable Speed Drive Unit with Direct Reading Spindle Speed Indicator and Controls. Hardinge Super-Precision Ball Bearing Spindle. Hardinge Tapered Spindle Nose. Hardened and Ground Dovetail Bed. Leadscrew Threading with Automatic Stop. Independent Electric Variable Power Feed […]

September 17, 2016

Sherline Model 4000 Mini Lathe Metalworking Tool Vintage USA

Sherline model 4000 mini metalworking lathe in good used working condition. Older model with brass bed, 1/5 HP AC/DC motor, good cord, on/off switch & motor speed control works. Secondhand lathe expect general wear, oil stains from age & use — Check Out The Pictures. Ask questions before purchasing. Check out my other auctions this […]

August 9, 2016

Sherline Lathe Model 4000 Used- Chucks, Centers, Tool Posts, Face Plates

This lathe is in excellent condition, slight backlash on screws. There is slight marking on cross slide where chuck touched. Tool posts are all used, one has been shortened but center height of tool bed is correct. Three jaw chucks are in good shape. One Jacobs drill chuck is missing key. This equipment has been […]

July 28, 2016

VINTAGE UNIMAT-SL AUSTRIA MINI LATHE Model No. DB-200 (Black Badge)

USED IN GOOD WORKING ORDER GUARANTEED WORKING. Unimat model db 200, used in good working order. Circular saw attachment # 1240 2. Fret saw #1080 3. Master thread patterns & followers, numbers 18,20,24,28,30,32,36,40,50 # 1271 4. Milling &fixture table # 1210 5. Steady rest #1201 6. 12 mm tap, drill, & die set #2871 7. […]

1 18 19 20 21