AML-618-Precision-Toolroom-Lathe-Hardinge-Hlv-h-Copy-Exc-with-Tooling-01-rzks

December 10, 2019

AML 618 Precision Toolroom Lathe Hardinge Hlv-h Copy Exc with Tooling

AML Model 618 Lathe. Buck 5 3 jaw Adjust-tru Chuck with both jaw sets. Buck 6 4 jaw Chuck. KDK Toolpost and 1 holder. Box or Misc change gears. Machine was barely used. PLEASE CHECK MY OTHER ITEMS. In our 15,100 square foot warehouse, we stock a large and diverse selection of metalworking machinery, parts, […]

HARDINGE-Super-Precision-Tool-Room-Lathe-HLV-H-with-Tooling-01-seh

December 8, 2019

HARDINGE Super Precision Tool Room Lathe HLV-H with Tooling

Swing Over Cross Slide……………………. 72″L x 29″W x 66H. SPECIFICATIONS SUBJECT TO VERIFICATION. THIS MACHINE IS IN GOOD WORKING CONDITIONS AND IS READY TO BE INSPECTED. OR FOR ANY ITEMS OR MACHINE THAT NEED DISMANTLE. PALLETS AND CRATING WILL VARY ON THE SIZE OF THE ITEM. The item “HARDINGE Super Precision Tool Room Lathe HLV-H […]

Hardinge-HLV-H-Super-Precision-Tool-Room-Lathe-11-x-18-1-5-HP-440V-3-Phase-01-qfad

December 5, 2019

Hardinge HLV-H Super Precision Tool Room Lathe 11 x 18 1.5 HP 440V 3 Phase

Hardinge HLV-H Super Precision Tool Room Lathe 11″ x 18″ 1.5 HP 440V 3 Phase. This is a fixed listing for a Hardinge Lathe. Capacities: Make: Hardinge Type: Super Precision Lathe Size: 11″ x 18″ Swing: 11″ Distance Between Centers: 18″ Motor HP: 1.5 Electric: 440V 60 Hz 3 Phase Includes all tooling pictured. This […]

JKA-precision-dial-gauge-watchmakers-lathe-jacot-tool-great-condition-01-xez

November 11, 2019

JKA precision dial gauge, watchmakers lathe, jacot tool, great condition

This is a very important tool which is used on a daily basis by every watchmaker that works with a watchmakers lathe or a Jacot Tool and shouldn’t be missing in any watchmakers workshop. The micrometer is absolutely precise, the contact jaws and the adjustable measuring table make it possible to measure the thickness accurately […]

Levin-Precision-Instrument-Lathe-Loaded-With-Tooling-01-xum

November 1, 2019

Levin Precision Instrument Lathe, Loaded With Tooling

Levin Precision Instrument Lathe with tons of tooling, manuals, schematics, blue prints, receipts, etc. The lathe is powered by an under drive in cabinet motor. The motor on top is for a separate drilling accessory, which is NOT included. Motors work, controllers work, spindle does not register any run out on. See pics for included […]

Wade-Precision-Tool-Room-Lathe-01-lrrz

October 21, 2019

Wade Precision Tool Room Lathe

Swing over Cross Slide. Swing over Compound Slide. Taper Standard for Centers. Spindle nose-hardened and ground threads. Heigh above bench to center line of spindle. 1-HP 208-220/440V 3-Phase 60Hz. Note: The Tachometer does not work, but the rest of the machine is fully functional. 2 x 10 TPI. 32 – 200 Low / 285 – […]

Levin-Precision-Jewelers-Watchmaker-Clockmakers-Lathe-Nice-Tooling-Serial-D08672-01-lw

September 6, 2019

Levin Precision Jewelers Watchmaker Clockmakers Lathe Nice Tooling Serial D08672

Levin Precision Jewelers Watchmaker Clockmakers Lathe Nice Tooling. Equipped With Variable Speed, Cross Slide, 6-Station Turret Assembly, Tailstock, Steady Rest, Table. Very Clean Machine, Hard to Get! Machine Can be inspected under power at our warehouse in Oxnard, CA. Please see pictures for additional details. The item “Levin Precision Jewelers Watchmaker Clockmakers Lathe Nice Tooling […]

Hardinge-Super-Precision-Tool-Room-Lathe-HLV-H-with-DRO-01-je

September 4, 2019

Hardinge Super Precision Tool Room Lathe HLV-H with DRO

Hardinge Super Precision Tool Room Lathe HLV-H with DRO. Condition is Used, threading capable, burnt out motor, install the motor of your choice single-phase or three-phase, currently 230 volt 3-phase. The item “Hardinge Super Precision Tool Room Lathe HLV-H with DRO” is in sale since Monday, September 2, 2019. This item is in the category […]

Hardinge-Super-Precision-HLV-H-Toolroom-Lathe-11-X-18-with-Tooling-1982-01-kvm

August 26, 2019

Hardinge Super Precision HLV-H Toolroom Lathe 11 X 18 with Tooling 1982

We are pleased to offer you.. Hardinge Super Precision Lathe HLV-H with Tooling & 5C Collets Year 1982. Our Inventory Number: 2911-440. Electrical: 460 V / 3 Phase / 60 Hz. Year of Mfg: 1982. Variable spindle speeds 125-3,000 R. Spindle construction-HARDINGE ball bearing. Spindle nose-Tapered spindle nose. Spindle capacity with round type 5C collets […]

JKA-precision-dial-gauge-watchmakers-lathe-jacot-tool-good-condition-01-kk

August 15, 2019

JKA precision dial gauge, watchmakers lathe, jacot tool, good condition

This is a very important tool which is used on a daily basis by every watchmaker that works with a watchmakers lathe or a Jacot Tool and shouldn’t be missing in any watchmakers workshop. The micrometer is absolutely precise, the contact jaws and the adjustable measuring table make it possible to measure the thickness accurately […]

1 2 16