Wasino-Lg-81-Live-Tools-01-zed

March 25, 2023

Wasino Lg-81 Live Tools

Wasino Lg-81 Live Tools. Were removed from a operational machine. Cords are worn and should be replaced. One has the label with the speed settings worn off. Comes with 3/4″ and 1/4″ collets. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “targe-88″ and is located in […]

Amada-Techno-Wasino-G07-Gang-Tool-CNC-Lathe-with-Bar-Feeder-01-ldo

January 20, 2023

Amada Techno Wasino G07 Gang Tool CNC Lathe with Bar Feeder

General Info: Stock #: SB-B-220051 Location: FL Brand: Amada Model: Techno Wasino G07 Year: 2008 Approx. We always recommend machine be inspected in person to verify condition. If you have any specific questions or would like to set up a time to view this piece of machinery feel free to contact the contact person for […]

Used-Wasino-LJ-63M-Live-Tool-CNC-Turning-Center-Lathe-Fanuc-Tailstock-Tool-Set-r-01-rt

December 8, 2022

Used Wasino LJ-63M Live Tool CNC Turning Center Lathe Fanuc Tailstock Tool Set’r

Great Running 1988 Wasino LJ-63M Live Tool CNC Turning Center. FANUC CNC Control 10 3-Jaw Chuck Tool Presetter Tailstock Misc Static Tool Holders (1) Z-Axis Live Tool Holder (1) X-Axis Live Tool Holder. Used Equipment Sales Contact. To see if you qualify contact Celeste Bozzi. Please verify it’s availability before purchasing! Skidding/Crating of items are […]

Wasino-LG-60-Gang-Tool-CNC-Lathe-with-Centroid-CNC-Control-01-uvlo

July 26, 2022

Wasino LG-60 Gang Tool CNC Lathe with Centroid CNC Control

This is a neat little small foot print gang tool style Wasino Lathe that we installed the Centroid CNC Control on. It is fully enclosed and will fit into a compact space. It has a New 5 HP Baldor fully programmable Spindle Motor, and the whole system can be ran 220 volt single phase. Nominal […]

Wasino-G07-F-Two-Axis-Gang-Tool-Style-Lathe-with-Gantry-Loader-LMC-46042-01-umx

May 29, 2022

Wasino G07-F Two-Axis Gang Tool Style Lathe with Gantry Loader LMC #46042

Swing Diameter – Maximum……………………………………… 3-15/16″ D x 3-15/16″ L. Chuck Size – Maximum………………………………………………. Spindle Speed – Maximum……………………………………… Spindle Motor (Duty Rated)……………………………………….. X-Axis Travels – Cross Slide Travel……………………………… Z-Axis Travels – Carriage Travel………………………………… Rapid Traverse Rates – X………………………………………. Rapid Traverse Rates – Z………………………………………. 93″L x 76″W x 98H. 32″L x 68″W x 62H. Actual Chip Conveyor/Coolant […]

AMADA-WASINO-AI-8-CNC-LIVE-TOOL-C-Y-AXIS-TURNING-LATHE-ROBOT-FANUC-32i-01-vl

April 3, 2021

AMADA WASINO AI-8 CNC LIVE TOOL C Y AXIS TURNING LATHE ROBOT FANUC 32i

Financing Available at Low Rates. New & Used CNC Machines. CNC LATHE / TURNING CENTERS. AMADA WASINO AI-8 CNC MULTI AXIS TURNING CENTER. We are a stocking dealer of New & Used Machine Tools located in Southern California & are members of the MDNA. We have thousands of different Manual, CNC Machines and Tooling in […]

AMADA-WASINO-AI-8-CNC-LIVE-TOOL-C-Y-AXIS-TURNING-LATHE-ROBOT-FANUC-32i-01-cr

December 17, 2020

AMADA WASINO AI-8 CNC LIVE TOOL C Y AXIS TURNING LATHE ROBOT FANUC 32i

Financing Available at Low Rates. New & Used CNC Machines. CNC LATHE / TURNING CENTERS. AMADA WASINO AI-8 CNC MULTI AXIS TURNING CENTER. We are a stocking dealer of New & Used Machine Tools located in Southern California & are members of the MDNA. We have thousands of different Manual, CNC Machines and Tooling in […]

June 9, 2018

Wasino 20×50 Lathe with Aloris Toolpost & Tooling

Nice condition Wasino 20×50 geared head lathe with a D1-6 spindle, 3 & 4 jaw chucks, Aloris toolpost and some holders, tailstock chuck, and live center. Ways are excellent and the screws are pretty tight. These are very well built machines with excellent rigidity and horsepower. Inspection under power in my Farmingdale, NJ shop is […]

April 12, 2017

Wasino LG-60 Gang Tool CNC Lathe with Centroid CNC Control

Great running gang tool lathe, Centroid retrofit controller with full C axis, fiber optics from computer, Baldor main spindle motor and Centroid X and Z axis motors, the rest is Japanese quality equipment built to make quality parts. 5C Spindle is very smooth and all axis are smooth. Has a pneumatic pic off and rear […]