December 19, 2018
Change Gear Set for Watchmakers Lathe Screw Cutting Attachment with 60 Tooth drive gear sized to fit Levin Ball Bearing Headstock spindles (open style BB Headstock with pulley visible in center of Headstock). Change gear tooth counts are 36, 40, 44, 48, 50, 54, 60, 72, 84, 96, 100. Gears are 48 pitch, 14.5 degree […]
December 11, 2018
Here is a Suberb and scarce Levin Watchmakers or Machinist’s Lathe 8mm Milling attachment. These are rare and desirable tools from any standpoint. It has been in storage for 30 years. I think it has seen little use during its working lifetime before going into storage. Right now it has fine surface oxide but no […]
December 2, 2018
Hardinge HLV-H High Precision Tool Room Lathe 11″ x 18″. Collet Closure, 5C Collets and Tooling. The Lathe Can be inspected under power at our Warehouse in Oxnard, CA 93033. I guarantee my sales. Please see pictures for additional details. The item “Hardinge HLV-H High Precision Tool Room Lathe 11 x 18 Taper Attachment Tooling” […]
November 16, 2018
Up for your consideration is a vintage Wolf Jahn milling attachment for a watchmakers size lathe. Its in excellent condition! Im having a very hard time telling if it has even been used! Spindle turns smooth, handle also turns as it should. Spindle holds 8mm collets, Wolf #42 collet is included. I do not see […]
November 5, 2018
Screw Cutting Attachment for Levin Watchmaker Lathe. Attachment is designed to mount on the end of Levin 8mm or 10mm Lathes with open Ball Bearing headstocks (‘open’ = pulley visible in middle of headstock). It is mounted on the end of the bed with two 10-32 screws. Will work with the Levin 12″ long WW […]
November 4, 2018
Screw Cutting Attachment for Levin Watchmaker with 8mm Cone Bearing Headstocks. Attachment is designed to mount on the end of Levin 8mm Lathes with Cone Bearing headstocks. It is mounted on the end of the bed with two 10-32 screws. Will work with the Levin 12″ long WW bed or the older 18″ long Instrument […]
September 26, 2018
1966 HARDINGE HLV-H Room Tool Lathe Radius Turning Attachment 4-Way Tool Post. EZ Systems Machine Reference Number. Achine Location: Lancaster, PA. Swing Over Bed: 11. Swing Over Carriage: 9. Swing Over Cross Slide: 6. Distance Between Centers: 18. Spindle Thru Hole: 1-1/4. Spindle Nose: Hardinge Taper. Collet Capacity: 1-1/16 Maximum. Spindle Speeds: 125 to 3000 […]
September 8, 2018
Hardinge Super Precision Lathe HC Threading Attachment & Lot Of Tooling. Machine Is Available For Inspection Under Power By Appointment. All Specifications Are Assumed To Be Correct But Must Be Confirmed By Purchasing Entity. The item “Hardinge Super Precision Lathe HC Threading Attachment & Lot Of Tooling” is in sale since Wednesday, February 28, 2018. […]
August 26, 2018
Emco Unimat SL – Power feed lathe attachment. The parcel will weigh about 1.5 kg & will be suitably packed to protect the contents. The item “Emco Unimat SL Power feed lathe attachment” is in sale since Saturday, July 14, 2018. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Lathes & […]
August 10, 2018
Sheldon 10x 28 Back-Geared Thread-Cutting Metal Lathe w/Mill Attach. +LOTS of Tooling (EXL-44B). Includes cabinet & all tooling shown in photots. Amps: 14.6A / 7.3A. Spindle Speeds with Open Belt. Spindle Speeds with Back Gear. Deep cuts in steel 0.060. Equivalent of Southbend Heavy 10. Nice strong small lathe for home or small shop. Used […]