Watchmakers Lathe 8mm 6 jaw chuck 8mm 6 jaw watch case bezel chuck watch lathe self centring chuck been used but still ok. Been used has marks but handy tool for watch repairer. See all photos for more information the restoration guy OR Girl!!! The item “Watchmakers Lathe 8mm 6 jaw chuck 8mm 6 jaw […]
Watchmakers Boxed BOLEY LATHE 6.5mm Compound Slide, 3 Jaw chuck, Step Collets 1/4
Collets 6.5mm (1/4 inches). From an old clockmakers workshop clearance.. This well appointed watchmakers lathe by this famous maker. This is all 6.5mm (about 1/4 inches) collet size – ideal for watch work and small clock too. The lathe was owned by a friend of mine for many years. It has the Vee style bed, […]
6 Jaw Bezel Chuck for Watchmaker’s Lathe 9mm Threaded Mount Very Good Cond
This 6 jaw bezel chuck for a watchmaker’s lathe is in very good condition. It is mounted with a 9mm threaded shank/arbor. The mounting flange is approximately 24mm in diameter. The over all diameter is 74mm. The only marring is along the wall of the mounting flange. There is no marring along the bearing surfaces […]
Vintage Watchmaker/Jeweler/Micro Lathe with 3 Jaw Chuck Jaw & More
Here is a vintage Watchmaker/Jeweler/Micro lathe from a Bygone Era! It came from the workshop of a local master machinist and ready to be enjoyed once again in a new home! > 12″ Long, 5″ from bottom to bed top, 7.5 from bottom to center of stocks. And several traditional drill chucks/keys included. > (2) […]
Older Unimat Small Metal Lathe With 3 Jaw Chuck And Tool Post Machinist Tool
USED, DIRTY, RUNNING, UNIMAT SMALL METAL LATHE. IT COMES WITH A 3 JAW CHUCK AND TOOL POST. THE 3 JAW CHUCK PROBABLY NEEDS SOME CLEANING. WHEN OPENING AND CLOSING THE CHUCK, THERE ARE A COUPLE OF SPOTS WHERE IT HANGS UP. THE LATHE HAS BEEN MOUNTED TO A STEEL PLATE. THE LATHE NEEDS TO BE […]
2011 HAAS ST-10 CNC lathe. 6 chuck, parts catcher, tool presetter, chip conv
OFFERED BY JAMESTOWN MACHINERY, INC. THIS IS IN OUR WAREHOUSE LOCATED IN MEADVILLE, PENNSYLVANIA. IT IS UNDER POWER AND AVAILABLE FOR INSPECTION. 123 L X 73 W X 80 H. THIS MACHINE IS IN GOOD. IT WAS TRADED IN ON A NEW LATHE. ALL EITHER USA MADE OR TOP NAME IMPORTS SANDVIK, ISCAR, ETC. (See […]
Ikegai Tur-25 CNC Lathe, C Axis Live Tooling, 2.5 Bar, 10” Chuck
IKEGAI TUR-25 with C axis live tooling s/n 50765 Fanuc OT Control C Axis Live Tooling Manuals 2.5″ Bar Capacity 3,150 Max RPM Spindle Speed 27.55″ Z-Axis, 9.84″ X-Axis 12 Position Turret Kitagawa B-10 10″ 3-Jaw Chuck 11,000+ lb. I will include the chip conveyor. Parts are still available through ecotech machinery Ikegai CNC Slant […]
Craftsman 6 1/2 4 Jaw Wood Lathe Chuck 22560 Reversible Jaw 3/4 X 16 Tpi
FOR SALE IS A CRAFTSMAN 6 1/2″ 4 JAW WOOD LATHE CHUCK MODEL 22560 REVERSIBLE JAW 3/4″ X 16 TPI. IT IS IN VERY CLEAN LIKE NEW EXCELLENT CONDITION. THIS CAN BE USED FOR WOOD LATHE MODELS 21716, 22800, 22816, 22836, AND 23821. IT COMES WITH THE OPERATOR’S MANUAL AND ORIGINAL BOX. IT DOES NOT […]
Colchester student lathe 12×24 3 jaw chuck with lots of tooling
12×24 colchester student lathe 3 jaw chuck with reversible jaws, face plate with centers and clamps, a full set of collets, follow rest, tailstock drill chuck, tool holders and bits, boring bars , and all wrenches and spanners its wired with a single phase motor and has the original 3 phase motor intact. The item […]
Vintage Watchmakers 8mm LATHE Victor collets jacot WW Bed 3 Jaw Chuck Drilling/T
From an old clockmakers workshop clearance.. I can’t see a makers mark but is on a Derbyshire WW pattern bed. Some of the collets are marked for VICTOR made in USA. Good selection of tools/accessories including. 8mm collet mounted 3 JAW CHUCK. Bronze TIP OVER T-REST. Unusual indexable JACOT rest? TAILSTOCK 8mm with JACOBS chuck&key […]