April 4, 2017
April 3, 2017
Sheldon 10X 26 Tool Room Lathe EXL-46-P With3&4 Jaw, 5C Collet, Steady +Xtra Nice
Each item is described to the best of our ability. We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On. Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend […]
February 11, 2017
Machinist Tool 9 South Bend Collet Draw Bar Set, Collets & Original Wood Box
The draw bar wheel has some dings on it, the original wooden box is dirty/worn. The Thread Protector has a 1-1/2-8TPI. Please Note: NOT all the collets are South Bend, see pics for sizes. ITEM DESCRIPTION : I try to describe most of the items to the best of my ability, there are times when […]
January 20, 2017
Collet Chuck Set With Myford Ml7 Super 7 Fitting Engineering Lathe Quality Tools
COLLET CHUCK SET WITH MYFORD ML7 SUPER 7 FITTING ENGINEERING LATHE QUALITY TOOLS. COLLET CHUCK WITH 28 COLLETS. Szm german high quality tools they are numbered but unfortunatley dont have the sizes on the collects just a number. FITS DIRECT ONTO STANDARD ML7 SUPER 7 HEADSTOCK. THE PARTS I SUPPLY ARE IN VERY GOOD ORDER. […]
November 17, 2016
Watchmaker Jeweler Lathe Derbyshire WW Collet Set 66pc w Box Moseley-Starrett+
Watchmaker Jeweler Lathe Derbyshire WW Collet Set 66pc w Box Moseley-Starrett+ Various manufacturers marks including, Starrett, Peerless, Moseley, Marco, etc. Sizes from 3 to 78. Some duplicates and half sizes. The item “Watchmaker Jeweler Lathe Derbyshire WW Collet Set 66pc w Box Moseley-Starrett+” is in sale since Wednesday, November 16, 2016. This item is in […]
November 6, 2016
Levin lever operated collet holding tailstock for 8mm watchmaker/jeweler lathe
LEVIN COLLET HOLDING TAILSTOCK – 8mm LEVER OPERATED. Works as it should. Excellent condition with minimal plating loss. Minor plating loss on a portion of the lever. A few marks on the end of the lever which do not interfere with operation. (see 3rd pic below). Please see pics for more info. I maintain an […]
October 22, 2016
Very Nice! Watchmaker lathe 8mm with collet holder tail stock HENRY PAULSON
Vintage Watchmaker / Jeweler lathe 8mm with collet holder tail stock and cross slide It looks like a Henry Paulson but I could not find the name anywhere so see pics you make the call. Its mounted on a wooden board includes motor. All in very good condition better than pictures show. Please note the […]
October 16, 2016
Vintage Derbyshire Elect Watchmaker Lathe, 18, Collet Holding Tailstock, 10mm
Vintage Derbyshire Elect Watchmakers Lathe w/ 18 Bed, Collet Holding Tailstock, Use 10mm Collets – see all 12 photos below. I acquired this lathe from a local estate about a month ago, it had been neglected & unused for many years and it looked very bad. This lathe works fine, but cosmetically it looks rough. […]
October 15, 2016
8mm Collet Set for Watchmakers Lathe, 52 pieces
8mm Collet Set for Watchmakers Lathe, 52 pieces. 8mm ww Sizes: 1 – 50 complete plus center point and cement brass holder. Very Good Condition, many appear un-used, few rust spots. Nice wooden Collet Box included. The free listing tool. The item “8mm Collet Set for Watchmakers Lathe, 52 pieces” is in sale since Sunday, […]
October 10, 2016
Vintage Peerless Lathe Collet Set! 46 Total Pieces
Very nice set of 8mm Peerless lathe collets & extra pieces. Included are 5 Wheel Chucks #’s 1-5, Wire Chucks #’s 3.4.5.6.7.8.9.10.11and 12-50 in even sizes. All appear in good condition, should probably be oil wiped. Also a Balance Chuck and misc. Pieces for a total of 46 total pieces by my count. Please see […]