https://usedlathetooling.info Thu, 16 Apr 2026 23:57:44 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://usedlathetooling.info/top-10-immediate-purchases-after-you-buy-a-mini-lathe-vevor-grizzly-lms-precision-matthews-seig/ https://usedlathetooling.info/top-10-immediate-purchases-after-you-buy-a-mini-lathe-vevor-grizzly-lms-precision-matthews-seig/#comments Wed, 31 Dec 2025 17:45:34 +0000 https://usedlathetooling.info/top-10-immediate-purchases-after-you-buy-a-mini-lathe-vevor-grizzly-lms-precision-matthews-seig/ ]]> https://usedlathetooling.info/top-10-immediate-purchases-after-you-buy-a-mini-lathe-vevor-grizzly-lms-precision-matthews-seig/feed/ 0 https://usedlathetooling.info/machining-a-custom-chuck-key-and-mini-review-of-my-grizzly-lathe-g0750g/ https://usedlathetooling.info/machining-a-custom-chuck-key-and-mini-review-of-my-grizzly-lathe-g0750g/#comments Sun, 27 Apr 2025 21:32:33 +0000 https://usedlathetooling.info/machining-a-custom-chuck-key-and-mini-review-of-my-grizzly-lathe-g0750g/ ]]> https://usedlathetooling.info/machining-a-custom-chuck-key-and-mini-review-of-my-grizzly-lathe-g0750g/feed/ 0 https://usedlathetooling.info/grizzly-9972-lathe-wheeled-iron-base-stand-include-gearbox-chucks-tools-extras/ https://usedlathetooling.info/grizzly-9972-lathe-wheeled-iron-base-stand-include-gearbox-chucks-tools-extras/#comments Thu, 12 Sep 2024 12:59:52 +0000 https://usedlathetooling.info/grizzly-9972-lathe-wheeled-iron-base-stand-include-gearbox-chucks-tools-extras/

























Well maintained working lathe with heavy cast iron base for stability and vibration. Wheeled for modular workshop space saver. Some cutting tools, belts, etc.

]]> https://usedlathetooling.info/grizzly-9972-lathe-wheeled-iron-base-stand-include-gearbox-chucks-tools-extras/feed/ 0 https://usedlathetooling.info/cnc-lathe-grizzly-g0602-with-flash-cut-cnc-conversion/ https://usedlathetooling.info/cnc-lathe-grizzly-g0602-with-flash-cut-cnc-conversion/#comments Mon, 26 Feb 2024 18:41:45 +0000 https://usedlathetooling.info/cnc-lathe-grizzly-g0602-with-flash-cut-cnc-conversion/













A complete CNC Lathe Kit includes a Grizzly G0602 Lathe with the Flash Cut CNC Controller and Heavy Duty Stepper Motors installed. This CNC Lathe has a Heavy Duty Manual Tool Post with multiple Tool Holders to accommodate all your turning needs. It requires three 110 volt receptacles (one each for the Lathe, CNC Controller and the Laptop). There is a SANDU K11-160A 3-Jaw Chuck installed. The factory ACME screw and nut system for the -X- and -Z- Axis have been replaced with High Precision Ball Screws. The foot print of this machine is 47-1/2″ Wide x 27″ Deep x 47 High. There is 16.500 of travel in the -Z- Axis from the Chuck Face to the -Z- Axis Face of the Tool Post from the Home Position. There is 4.840 of travel in the -X- Axis from the Chuck Centerline to the -X- Axis Face of the Tool Post from the Home Position. It comes with a HP/Lenovo Laptop that already has the Flash Cut CNC Software installed. Also included are all the Tool Holders, Chuck Jaws and associated Tooling Inserts shown in the pictures. This Kit is “Plug and Play” as is. Just either copy a G Code Program onto the Hard Drive or program right at the machine and you’re ready to go. The Flash Cut CNC Software is easy to use and allows Multiple Fixture and Tooling Offsets to be both programmed in the G Code and adjusted in the Settings. This lathe is capable of very precise repeatability as we typically experience +/- 0.00025 when cutting our synthetic materials. Lathe comes with everything shown in all the pictures. Machine can be inspected upon request. Custom Pallets and Professional Packaging are available upon request and not included in Price.

]]> https://usedlathetooling.info/cnc-lathe-grizzly-g0602-with-flash-cut-cnc-conversion/feed/ 0 https://usedlathetooling.info/10-metal-lathe-steady-rest-enco-grizzly-msc-victor-beck-southbend-clausing/ https://usedlathetooling.info/10-metal-lathe-steady-rest-enco-grizzly-msc-victor-beck-southbend-clausing/#comments Sat, 04 Nov 2023 03:36:13 +0000 https://usedlathetooling.info/10-metal-lathe-steady-rest-enco-grizzly-msc-victor-beck-southbend-clausing/














Used 10 Steady Rest. I DO NOT have the bottom plate or bolt for that plate.

]]> https://usedlathetooling.info/10-metal-lathe-steady-rest-enco-grizzly-msc-victor-beck-southbend-clausing/feed/ 0 https://usedlathetooling.info/thread-cutting-on-the-grizzly-g4003-lathe/ https://usedlathetooling.info/thread-cutting-on-the-grizzly-g4003-lathe/#comments Tue, 05 May 2020 18:57:59 +0000 http://usedlathetooling.info/thread-cutting-on-the-grizzly-g4003-lathe/ ]]> https://usedlathetooling.info/thread-cutting-on-the-grizzly-g4003-lathe/feed/ 0 https://usedlathetooling.info/grizzly-g0554-14-x-40-gap-bed-engine-lathe-3-jaw-chuck-tool-posts-single-phase/ https://usedlathetooling.info/grizzly-g0554-14-x-40-gap-bed-engine-lathe-3-jaw-chuck-tool-posts-single-phase/#comments Fri, 17 Apr 2020 17:52:02 +0000 http://usedlathetooling.info/grizzly-g0554-14-x-40-gap-bed-engine-lathe-3-jaw-chuck-tool-posts-single-phase/













THIS MACHINE IN THE “H” GEAR RANGE MAKES SOME NOISE! I TOOK THE COVER OFF AND LOOKED INSIDE I DIDN’T SEE ANYTHING! OTHERWISE LATHE IS IN GOOD CONDITION. ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER. Spindle Bore 1 9/16. Heavy Duty Cam lock Spindle D1-4. Heavy Duty Guideway Width 10-1/4. Heavy Duty cast Iron Base. Heavy Duty Main Motor, 3HP. 12 Spindle Speeds from 40-1800 RPM (Lever change only, no belts to change). Machine Cuts Wide Range of Inch Threads and Metric Threads. Spindle is Balanced, Hardened and Precision Ground. Spindle is Supported by High Precision Tapered Roller Bearings. All Gears and Shafts are Hardened and Precision Ground. Guideways Induction Hardened and Precision Ground. Oil Bath Lubrication System in Headstock and Feed Box. Machine Made with true Inch Leadscrews , 8TPI Main Feed Screw, 10 TPI. Turn Pitch Cross and Compound Feed Screws with Inch and Metric Dials. Swing Over Bed 14. Length of Work Piece 40. Swing Over Cross Slide 8-1/2. Swing in Gap 20. Width of Bed 10-1/2. Spindle Bore 1- 9/16. Taper of Spindle Center M. Spindle Speeds 40-1800 rpm / 12 steps. Longitudinal Feeds 0.0012-0.0294 IPR, 40 kinds. Cross Feeds 0.0004-0.0103 IPR, 40 kinds. Inch Threads 4 112 TPI. Metric Threads 0.45-7.5 mm. Travel of Top Slide 3-1/2. Travel of Cross Slide 6-1/2. Diameter of Tailstock Quill 1 3/4. Travel of Tailstock Quill 4-3/4. Taper of Tailstock Quill Center M. Lead Screw Pitch 8 TPI. Main Motor 3 HP, 220V, 3 Phase. Coolant Pump Motor 1/8 HP, 220V. Overall Dimensions, LxWxH 74 x 30 x 50. COMES WITH TOOL POST AND 6.5 3 JAW CHUCK & DRILL CHUCK. (PLEASE CHECKOUT THE OTHER ITEMS FORSALE). I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. The item “GRIZZLY G0554 14 X 40 GAP BED ENGINE LATHE 3 JAW CHUCK TOOL POSTS SINGLE PHASE” is in sale since Tuesday, April 7, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Metalworking Lathes”. The seller is “adeal4uto” and is located in Louisville, Kentucky. This item can be shipped to United States.

• Swing Over Bed: 14 in
• Brand: GRIZZLY G0554
• Non-Domestic Product: No
• Model Year: 3/2005
• Model: G0554
• Modified Item: No
• Highest Spindle Speed (RPM): Less than 1500
• Max Spindle Speed (RPM): 1500 – 2000
• Type: Engine
• Chuck Size: 6.5 in
• Country/Region of Manufacture: Taiwan
• Hole Thru Spindle: 1.50
• Control Type: Manual Control
• Power Source: 220V SINGLE PHASE
• Control: Manual
• Distance Between Centers: 31 in – 40 in
• Custom Bundle: No
• Machine Type: Engine Lathe
• Phase: Three
• MPN: 41130

]]> https://usedlathetooling.info/grizzly-g0554-14-x-40-gap-bed-engine-lathe-3-jaw-chuck-tool-posts-single-phase/feed/ 0 https://usedlathetooling.info/grizzly-12x36-engine-lathe-well-tooled-dro-qctp-sr-fr-220v-1ph-stk-19036/ https://usedlathetooling.info/grizzly-12x36-engine-lathe-well-tooled-dro-qctp-sr-fr-220v-1ph-stk-19036/#comments Mon, 27 May 2019 11:20:44 +0000 http://usedlathetooling.info/grizzly-12x36-engine-lathe-well-tooled-dro-qctp-sr-fr-220v-1ph-stk-19036/











GRIZZLY 12X36 ENGINE LATHE WELL TOOLED DRO QCTP SR FR 220V, 1PH STK 19036. 2010 MODEL, 9 SPEED 70-1400. 220V SINGLE PHASE 2HP. D1-5 SPINDLE, 1-9/16 HOLE. GAP BED 17-1/2 IN GAP. LIVE CENTER, DEAD CENTER. 6″ 3-JAW, 8″ 4-JAW, 10 FACE PLATE MT3 TAILSTOCK, CHANGE GEARS. QUICK CHANGE TOOL POST WITH 2 HOLDERS. ROLLER BEARING STEADY AND FOLLOW REST. We continually strive to improve our services in order to meet our customers expectations. Please use the “Add To Cart” feature. Located above the first item in your cart. If you would like to know where you package is in transit? If you have an issue with an item you received? Please inspect photos for our items as they are what you will be receiving. We photo the actual item that you will be receiving. The item “GRIZZLY 12X36 ENGINE LATHE WELL TOOLED DRO QCTP SR FR 220V, 1PH STK 19036″ is in sale since Thursday, May 16, 2019. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Tools\Metalworking Lathes”. The seller is “themachineryshop” and is located in Wadley, Alabama. This item can be shipped worldwide.

• Country/Region of Manufacture: China
• Hole Thru Spindle: 1-9/16
• Type: Engine
• Distance Between Centers: 31” – 40”
• MPN: GRIZZLY
• Swing Over Bed: 12”
• Highest Spindle Speed (RPM): Less than 1500
• Make: G4003G
• STORE CATEGORY: LATHES

]]> https://usedlathetooling.info/grizzly-12x36-engine-lathe-well-tooled-dro-qctp-sr-fr-220v-1ph-stk-19036/feed/ 0 https://usedlathetooling.info/dovetail-cutting-in-large-tools-to-use-on-my-grizzly-lathe/ https://usedlathetooling.info/dovetail-cutting-in-large-tools-to-use-on-my-grizzly-lathe/#comments Wed, 15 May 2019 21:41:36 +0000 http://usedlathetooling.info/dovetail-cutting-in-large-tools-to-use-on-my-grizzly-lathe/ ]]> https://usedlathetooling.info/dovetail-cutting-in-large-tools-to-use-on-my-grizzly-lathe/feed/ 0 https://usedlathetooling.info/grizzly-lathe-12-x-36-with-all-the-tooling-cutters-quick-change-mics-etc/ https://usedlathetooling.info/grizzly-lathe-12-x-36-with-all-the-tooling-cutters-quick-change-mics-etc/#comments Wed, 10 Oct 2018 16:02:03 +0000 http://usedlathetooling.info/grizzly-lathe-12-x-36-with-all-the-tooling-cutters-quick-change-mics-etc/



Grizzly 12 x 36 metal lathe. The item “Grizzly Lathe 12 x 36 with all the tooling cutters, quick change, mics, etc” is in sale since Sunday, July 22, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Lathe”. The seller is “5345209” and is located in La Vernia, Texas. This item can’t be shipped, the buyer must pick up the item.

• Brand: Grizzly
• Model: Grizzly
• Country/Region of Manufacture: China
• MPN: G4003G

]]> https://usedlathetooling.info/grizzly-lathe-12-x-36-with-all-the-tooling-cutters-quick-change-mics-etc/feed/ 0