MOD DB 200 Made in Austria. Lots of extras with this in the original case. I plugged it in and it seems to run fine. I tried the cranks and bolts and all seems ready to go. I do not know much about these so please ask questions. If it is in the photo it […]
Unimat SL1000 Lathe, Milling Column, Three-Jaw Chuck, Milling Table, +More
Unimat SL1000 in Very Good Condition, Many Extras. This is a used Unimat SL1000 in good working order. That’s why it is a slightly different color. There is yet a third incomplete DB200 tailstock with a brass thread reducer installed. Including is the milling column and mount, the tool rest for woodturning, the three jaw […]
E. Luthy main spring counter, watchmakers lathe, approx 85y, dream condition
The tool is in dream condition. This tool is used to determine the length of the main spring when exchanging it (for pocket and wrist watches, with a frequency of 18000 an hour). The tool is made of two parts, on the bottom there is a precision balance and a grappler on the top. The […]
Clausing Metosa 13×40 Lathe with Tooling
Very good Clausing Metosa 13 x 40 lathe with 3 jaw chuck, block toolpost & holders, tailstock chuck & live center. Paint is all original. Lathe is plug in ready. Ways are in great shape and the screws are tight. PLEASE CHECK MY OTHER ITEMS. I leave the worn out and repainted machinery for the […]
MACHINIST TOOLS LATHE MILL Machinist Aloris BX Quick Change Tool Post
The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. PLEASE KNOW THAT I TRY TO SATISFY ANY […]
MACHINIST TOOLS LATHE MILL DoAll Croblox Gage Block Set
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I tried to take photos of the parts that came with it. PLEASE SEE THE PHOTOS FOR […]
Grouts excelsior, Jewelers lathe, watchmaker, treadle lathe 18, excellent cond
18″ accually measures at 17-1/2″ across. Width of wheel is 1-3/16″ and the groove is 3/16″. I do believe this fantastic piece retains almost all of the original japaning. Probably 95/97%, Paint is just not this thick and the look cannot be imitated. Superb condition with all pieces and parts present and working. No cracks, […]
Lorch Schmidt & Co watchmakers lathe
LORCH SCHMIDT & CO. Vintage 6mm watchmakers lathe in the box with many original extras including. Ready to use, 100% working condition. The bakelite button on the end of the drawbar is broken, this does not affect the functionality. (look on the right hand side of the box – it is laying horizontal). The total […]