March 20, 2020
VINTAGE LEVIN LEVER OPERATED TAILSTOCK 8MM FOR WATCHMAKERS LATHE. The tailstock is lever operated through a rack and pinion feed system. The hardened spindle accepts all Type D collets or tooling. A drawbar is supplied with tailstock for holding collets and tooling. A cam lock device permits locking the spindle in any selected position. TAILSTOCK […]
March 7, 2020
Levin radius cutting slide has a used mounted diamond tool included and unit is in good working order. Each dial and gauge is metric in. Please note the red divisions on the gauge face are for concave cutting and the black for convex. The item “LEVIN LATHE RADIUS COMPOUND SLIDE FOR STYLE D 10MM” is […]
February 12, 2020
This is my second Levin I have had, so I know a bit about them but not everything. This 10mm Levin was used in a hearing aid research lab making prototypes, but they took the spindle out of it and used it to push a very micro pin in to the plastic prototypes. It was […]
February 5, 2020
LEVIN 8 MM MILLING ATTACHMENT FOR WATCHMAKER LATHE. I have used this attachment for many years in my shop. I did not use the attachment for production work but rather to machine individual parts as the need arose in my repair work. When I bought it I disassembled it, cleaned and lubricated the ways and […]
January 30, 2020
VINTAGE WATCHMAKERS LEVIN HARD LATHE WITH LEVER TAILSTOCK HEADSTOCK COLLETS 8MM WITH PEDESTAL STAND. The lever tailstock reads LEVIN on one side and 39085-2 on the other. The headstock reads LEVIN HARD H01578. The item pictured is the item you will receive. PLEASE SEE PICTURES FOR EXACT CONDITION. The item “VINTAGE WATCHMAKERS LEVIN HARD LATHE […]
January 29, 2020
Very nice and tested Levin 8mm lathe with collets, saw table, belt material and original bench hold down. 8, 1.0, 1.1, 1.2, 1.4, 1.7. 1.8, (3) 2.0, 2.4. (3) 2.5, 3.0, (2) 3.2, 3.3, (2) 3.5, 4.1, 4.5, 4.8, (3) 5.0mm. The item “LEVIN 8mm WATCHMAKER LATHE with COLLETS & ACCESSORIES” is in sale since […]
December 9, 2019
I got this and no longer need it. The condition is super. Please look at the photos. The collets are 10mm and there are a few accessories (saw table) and manual that are not shown. MAKE ALL OF THE ARRANGMENTS. AND PAY FOR RENTING A TRAILER. PAY FOR PALLET AND WOOD, AND MY TIME. Please […]
November 1, 2019
Levin Precision Instrument Lathe with tons of tooling, manuals, schematics, blue prints, receipts, etc. The lathe is powered by an under drive in cabinet motor. The motor on top is for a separate drilling accessory, which is NOT included. Motors work, controllers work, spindle does not register any run out on. See pics for included […]
October 8, 2019
Screw Cutting Attachment for Levin Watchmaker with 8mm Cone Bearing Headstocks. Attachment is designed to mount on the end of Levin 8mm Lathes with Cone Bearing headstocks. It is mounted on the end of the bed with two 10-32 screws. Will work with the Levin 12″ long WW bed or the older 18″ long Instrument […]
October 7, 2019
We are The Antique Clock Repair Co. In Glendale 623 847 9617 and are thinning out our tools and parts. Here we have a new (un-used) Levin 10MM Instrument Lathe. I took it it out the box twice over the years to run the headstock a bit to keep the bearing grease from hardening. Then […]