Watchmaker-Jacot-Pivot-Lathe-as-is-Cheap-01-ytku

September 29, 2021

Watchmaker Jacot Pivot Lathe, as is Cheap

Watchmaker Jacot Pivot Lathe, as is Cheap! . One end for very small pivots is damaged, see photo. As I don’t work on many ladies this was not a problem. I used it for a while, and upgraded. These can cost 2k new, so this is a frugal choice. Begin advanced training now with a […]

Rare-Antique-Jeweler-s-Watch-Makers-Lathe-Pivoter-Tool-Watchmaker-Pivot-01-xtol

August 21, 2021

Rare Antique Jeweler’s Watch Makers Lathe Pivoter Tool Watchmaker Pivot

A vintage jeweler’s or watchmaker’s lathe. No sure how it would have been mounted or used. Looks to be in overall good used condition with some wear. One of the horizontal posts turns, the other does not, has a sliding tool holder that is also stuck a bit. Measures about 6-1/2 long, no apparent makers […]

Watchmakers-Lathe-Pivot-Polishing-and-Repivotting-Set-2-01-lj

August 7, 2021

Watchmakers Lathe Pivot Polishing and Repivotting Set 2

Watchmakers lathe tailstock universal runner, Jacot drum, drill plate , alignment runner and drill holding runner for polishing pivots and repivotting arbors. The drill holding runner takes standard watchmaker spade drills with 1.5 mm stub. The universal runner is 7mm in diameter so will fit most Lorch, Wolf Jahn, Bergeon etc lathes. Please check the […]

Rare-Pivot-Drilling-Lathe-Lerrac-For-Watchmaker-Tool-eta-bergeon-01-hl

July 30, 2021

Rare Pivot Drilling Lathe Lerrac For Watchmaker Tool, eta, bergeon

Rare Pivot Drilling Lathe Lerrac For Watchmaker Tool, eta, bergeon. Please look at the pictures. You can receive it within 30 days. THANK YOU VERY MUCH. The item “Rare Pivot Drilling Lathe Lerrac For Watchmaker Tool, eta, bergeon” is in sale since Wednesday, July 21, 2021. This item is in the category “Jewelry & Watches\Watches, […]

Watchmakers-Pivot-Polisher-Lathe-Attachment-HARDINGE-BROS-01-zg

July 22, 2021

Watchmakers Pivot Polisher, Lathe Attachment, HARDINGE BROS

This listing is for a Watchmakers Pivot Polisher. Lathe attachment with polishing lap and idler pulley. The Tool is in good working condition. Cosmetic condition is as shown in the pictures. Pictures are part of my description. Please inspect all of them carefully. This is as accurate of a. As I can give. I will […]

Watchmakers-Lathe-Pivot-Drilling-Polishing-Tailstock-Runner-Attachment-01-rkw

April 26, 2021

Watchmakers Lathe Pivot Drilling Polishing Tailstock Runner Attachment

This is 6.95. The Diameter of the attachments are 6mm and 5.9mm. They should fit Lorch and similar tailstocks.. The item “Watchmakers Lathe Pivot Drilling Polishing Tailstock Runner Attachment” is in sale since Saturday, July 25, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Tools & Repair Kits”. […]

1 2 4