Hardinge lathe tool holders.
May 26, 2024
July 30, 2022
Mazak 21/30 X 100 Gap Bed Engine Lathe 16 3 & 4 Jaw Chuck Tool Posts
ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER. Mazak 21″/30″ x 100 Gap Bed Engine Lathe. Swing Over Bed- 25. Swing over Cross Slide- 13 1/8. Swing over Removable Block Gap- 28.1/8. Length of Gap- 11. Distance Between Centers- 100. Spindle Bore- 3 1/8. Spindle Nose (Camlock Type) D1-8. Spindle Speeds 25 to 1,500 RPM. Inch […]
June 3, 2022
Mazak 24/35×120 Gap Bed Engine Tool Room Lathe 3 & 4 Jaw Chuck Tool Posts Tracer
ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER. MODEL: MAZAK 24 SERIAL NUMBER: 31858W. MAZAK MODEL 24″ X 120″ GAP BED LATHE. Swing Over Bed: 24. Swing Over Cross Slide: 14.5. Swing In Gap: 35. Length of gap section on bed: 16.5. Distance Between Centers: 120. Spindle Bore: 4.12. Spindle speeds: 12 to 1,200 RPM. (16) […]
April 17, 2020
Grizzly G0554 14 X 40 Gap Bed Engine Lathe 3 Jaw Chuck Tool Posts Single Phase
THIS MACHINE IN THE “H” GEAR RANGE MAKES SOME NOISE! I TOOK THE COVER OFF AND LOOKED INSIDE I DIDN’T SEE ANYTHING! OTHERWISE LATHE IS IN GOOD CONDITION. ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER. Spindle Bore 1 9/16. Heavy Duty Cam lock Spindle D1-4. Heavy Duty Guideway Width 10-1/4. Heavy Duty cast Iron Base. […]
August 9, 2016
Sherline Lathe Model 4000 Used- Chucks, Centers, Tool Posts, Face Plates
This lathe is in excellent condition, slight backlash on screws. There is slight marking on cross slide where chuck touched. Tool posts are all used, one has been shortened but center height of tool bed is correct. Three jaw chucks are in good shape. One Jacobs drill chuck is missing key. This equipment has been […]