https://usedlathetooling.info Fri, 17 Apr 2026 11:58:46 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://usedlathetooling.info/aloris-da-81-threading-and-grooving-tool-please-see-pics-new-or-used-read/ https://usedlathetooling.info/aloris-da-81-threading-and-grooving-tool-please-see-pics-new-or-used-read/#comments Sun, 22 Feb 2026 07:50:18 +0000 https://usedlathetooling.info/aloris-da-81-threading-and-grooving-tool-please-see-pics-new-or-used-read/








Item was with other tools and lathe tools. Don’t know if was used. Was inside a non climate controlled room so may have some surface rust but besides that don’t see any signs of wear.

]]> https://usedlathetooling.info/aloris-da-81-threading-and-grooving-tool-please-see-pics-new-or-used-read/feed/ 0 https://usedlathetooling.info/sony-lh30-2-axis-dro-digital-read-out-tested-good-lathe-mill-grinder/ https://usedlathetooling.info/sony-lh30-2-axis-dro-digital-read-out-tested-good-lathe-mill-grinder/#comments Sun, 15 Feb 2026 19:33:41 +0000 https://usedlathetooling.info/sony-lh30-2-axis-dro-digital-read-out-tested-good-lathe-mill-grinder/



The SONY LH30-2 axis DRO Digital Read Out is a reliable tooling component designed for lathes, mills, and grinders. With a tested and good performance, this digital read out system ensures precise and accurate measurements during CNC machining and metalworking processes. The SONY brand guarantees high-quality and durability, making it a valuable addition to any industrial manufacturing setup.

]]> https://usedlathetooling.info/sony-lh30-2-axis-dro-digital-read-out-tested-good-lathe-mill-grinder/feed/ 0 https://usedlathetooling.info/the-quick-step-mill-john-payne-hemingway-kits-myford-lathe-tool-post-chuck-read/ https://usedlathetooling.info/the-quick-step-mill-john-payne-hemingway-kits-myford-lathe-tool-post-chuck-read/#comments Thu, 17 Apr 2025 09:06:44 +0000 https://usedlathetooling.info/the-quick-step-mill-john-payne-hemingway-kits-myford-lathe-tool-post-chuck-read/






This Quick Step Mill Hemingway kit runs great on 110v power and is perfect for those in the business and industrial fields who need a reliable borning machine. The model is Hemingway and it is made specifically for CNC, metalworking, and manufacturing needs. The mill has some light surface rust from sitting but is in overall very good condition (has an engraving as seen in pic 2). Unfortunately had to take out the switches for the forward/reverse functions as something wasn’t functioning properly with the wiring. Wired it without switches so it runs once plugged in (no off switch) and only forward (no reverse switch).

]]> https://usedlathetooling.info/the-quick-step-mill-john-payne-hemingway-kits-myford-lathe-tool-post-chuck-read/feed/ 0 https://usedlathetooling.info/habegger-jh-70-lathe-cross-slide-swiss-fits-schaublin-70-dials-read-up-to-80/ https://usedlathetooling.info/habegger-jh-70-lathe-cross-slide-swiss-fits-schaublin-70-dials-read-up-to-80/#comments Wed, 20 Oct 2021 09:18:13 +0000 http://usedlathetooling.info/habegger-jh-70-lathe-cross-slide-swiss-fits-schaublin-70-dials-read-up-to-80/












Habegger JH 70 CROSS SLIDE Swiss Fits Schaublin 70. This is a Habegger JH 70 cross slide/compound in great shape 5 backlash on cross and 6 lines backlash on compound. Dials go up to 80. You can see from the pics in excellent shape. No dings, no Rust and wasn’t rusty any discoloration is due to stubborn grease or missed it while cleaning. Have an entire lathe can list it complete if interested. Also has quick collet closer. The item “Habegger JH 70 Lathe CROSS SLIDE Swiss Fits Schaublin 70. Dials read up to 80″ is in sale since Friday, July 16, 2021. This item is in the category “Collectibles\Tools, Hardware & Locks\Tools\Machining”. The seller is “soundbymichael” and is located in Baldwin, New York. This item can be shipped worldwide.

• Brand: Unbranded
• Modified Item: No

]]> https://usedlathetooling.info/habegger-jh-70-lathe-cross-slide-swiss-fits-schaublin-70-dials-read-up-to-80/feed/ 0 https://usedlathetooling.info/vintage-g-boley-marshall-watchmakers-lathe-with-motor-head-tail-stock-read/ https://usedlathetooling.info/vintage-g-boley-marshall-watchmakers-lathe-with-motor-head-tail-stock-read/#comments Fri, 25 Jun 2021 14:32:06 +0000 http://usedlathetooling.info/vintage-g-boley-marshall-watchmakers-lathe-with-motor-head-tail-stock-read/










Includes – Lathe with head stock & draw bar, tail stock, Tool rest that tips over but not connecting bolt, Kendrick & Davis 110 volt lathe motor, & the rest to put it on to work on it. Lathe Bed Length – End of point to end of point around 11. Condition- Good running in both reverse and forward but there is and a neutral. May need oiled or the points cleaned. The lathe and the rest might need cleaned some but all looks good and ready to use. Check out our other Watch Auctions. The item “Vintage G BOLEY Marshall Watchmaker’s LATHE with Motor, Head & Tail Stock + read” is in sale since Friday, June 18, 2021. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Tools & Repair Kits”. The seller is “workhomelib” and is located in Angel Fire, New Mexico. This item can be shipped worldwide.

• Brand: Boley
• Type of Tool: Lathe

]]> https://usedlathetooling.info/vintage-g-boley-marshall-watchmakers-lathe-with-motor-head-tail-stock-read/feed/ 0 https://usedlathetooling.info/a883-dumore-5g-lathe-tool-post-grinder-kit-115v-southbend-13-others-read-ad/ https://usedlathetooling.info/a883-dumore-5g-lathe-tool-post-grinder-kit-115v-southbend-13-others-read-ad/#comments Mon, 27 Aug 2018 06:19:52 +0000 http://usedlathetooling.info/a883-dumore-5g-lathe-tool-post-grinder-kit-115v-southbend-13-others-read-ad/













Note: A-883 is my inventory # only. PLEASE READ ENTIRE LISTING! Here is a excellent working used Dumore 5G Lathe tool Post Grinder. What you see is what you get. It was from a lightly used Southbend 13 lathe setup and as you know these grinders are adaptable to many other models depending on the mount you use or can fabricate to fit your tool post/application. I tried to take some photos with sizes of all the pieces (if you zoom in) so you know what you are working with. I DO NOT GUARANTEE IT WILL FIT YOUR MODEL AS IT IS, YOU MADE NEED TO ADJUST IT, MODIFY THE MOUNT, ETC. It works great, and has 3 drive pulleys. No grinding stones are included. I just oiled and saturated the cotton wicking in the long grinding spindle shaft so you may get a few drops out of it on the first few uses. I will try and list some sizes below to help you with your application. If you do not see it pictured in the photos, IT IS NOT INCLUDED. I believe these models can handle wheels from 1/4″ to 5″ if you have all the required bushings, adapters, flanges, drive pulleys, motor pulleys, etc. Dumore 5G 115V 3.5 Amps 10,000 RPM Description/Sizes of Items/Mounts: (Approx quick measurements) Tool Post custom made rectangular baseplate: 3.00″ long x 1.75″ wide x. Tool post 3/4″-10 x 5.50″ long stud welded to rectangle mount. Round custom part of Tool Post holder: 1.48″-1.49″ Post. Round welded base 3.17 diameter. Length is 3.30 for height adjustment. Is 4.47″ Stud hole is 0.7580″ approx. Grinding spindle main diameter is 1.750 Large part that is held by 2 clamping holders on motor unit. Grinding spindle on tapered end: Tapped for 1/4″-28 retaining screw with 5/8″ small bushing/arbor. 1/4-28 screw is 1-3/8 long. 3 Drive Pulleys included. Small is 0.8675, Med. Is 1.544 (currently on Spindle), Lg. All 3 are crowned to hold and center belt while on spindle. It looks like the factory pulleys listed above have been balanced. It looks like they are stamped sizes: 1,3,5. Motor Pulley: The one installed on the motor drive is 1.35″-1.36″ where the belt rides. Notes: There is a clamping bolt on the motor frame tool post holder that has a cam mechanism inside to lock the unit to the height you set it at. You may need your own arbors, flanges, etc depending on what grinding wheels you use. No grinding wheels included. You may need to adjust or modify the tool post mount to fit your application. Not hard at all to fab if you do. Manuals available online for this model. If you have any questions I will try and answer them the best I can. The item “A883 DUMORE 5G Lathe Tool Post Grinder Kit 115V Southbend 13 & Others Read AD” is in sale since Thursday, January 25, 2018. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\CNC & Metalworking Supplies\Equipment Specific Tooling\Grinding”. The seller is “hollowpoints” and is located in Uhrichsville, Ohio. This item can be shipped to United States.

• Brand: Dumore
• MPN: 5G
• Country/Region of Manufacture: United States

]]> https://usedlathetooling.info/a883-dumore-5g-lathe-tool-post-grinder-kit-115v-southbend-13-others-read-ad/feed/ 0 https://usedlathetooling.info/harrison-aa-13-lathe-digital-read-out-chuck-q-c-tool-post/ https://usedlathetooling.info/harrison-aa-13-lathe-digital-read-out-chuck-q-c-tool-post/#comments Wed, 01 Aug 2018 04:30:33 +0000 http://usedlathetooling.info/harrison-aa-13-lathe-digital-read-out-chuck-q-c-tool-post/









Harrison AA 13 Variable Speed Lathe with DRO. 1.5 spindle hole. Quick Change Tool Post. Wire Transfers and Company Checks Preferred. The item “Harrison AA 13 Lathe, Digital Read Out, Chuck, Q. C. Tool Post” is in sale since Thursday, February 1, 2018. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Lathe”. The seller is “neoshoindustrialsupply” and is located in Neosho, Missouri. This item can’t be shipped, the buyer must pick up the item.

• Brand: Harrison Lathe
• Model: Harrison AA 13″
• Country/Region of Manufacture: United Kingdom

]]> https://usedlathetooling.info/harrison-aa-13-lathe-digital-read-out-chuck-q-c-tool-post/feed/ 0 https://usedlathetooling.info/hardinge-hlv-h-super-precision-tool-room-lathe-sony-2-axis-digital-read-outs/ https://usedlathetooling.info/hardinge-hlv-h-super-precision-tool-room-lathe-sony-2-axis-digital-read-outs/#comments Tue, 15 May 2018 23:03:31 +0000 http://usedlathetooling.info/hardinge-hlv-h-super-precision-tool-room-lathe-sony-2-axis-digital-read-outs/













Here is a nice running Hardinge HLV-H Tool Room Lathe. This lathe can be inspected in Mpls MN. To Set up an inspection or to see a video of this machine, please contact Jim. Note: This machine has been rebuilt. We have no knowledge or data on the rebuild. We will load on your carrier for free. HARDINGE 11 x 18 SUPER PRECISION TOOL ROOM LATHE w/. SONY 2 AXIS DRO. MODEL: HLV-H, S/N: HLV-H-4424 NEW: 1971. SPINDLE NOSE: HARDINGE TAPERED NOSE. VARIABLE SPINDLE SPEEDS: 125 TO 3000 RPM. HOLE THROUGH SPINDLE: 1-1/4. W/ROUND 5C COLLETS: 1-1/6. W/HEXAGON 5C COLLETS: 7/8. W/SQUARE 5C COLLETS: 3/4. W/STEP CHUCKS: 1-1/16″ TO 6″. SWING OVER BED: 11. SWING OVER CARRIAGE: 9. SWING OVER CROSS SLIDE: 6. DISTANCE BETWEEN CENTERS: 18. COMPOUND SLIDE TRAVEL: 3. CARRIAGE POWER FEED RANGE: 5/16″ TO 7″ IPM. CROSS SLIDE POWER FEED RANGE: 3/16″ TO 4″ IPM. TAILSTOCK SPINDLE DIAMETER: 1-3/8. TAILSTOCK SPINDLE TRAVEL: 3-3/4. TAILSTOCK SPINDLE TAPER: #2 MT. 11″ TO 108″ TPI. 65″ x 28″ x 58. WEIGHT: 1,700 LBS. SONY 2 AXIS DRO: GUSHER PUMP COOLANT SYSTEM. NOTE: MACHINE WAS REBUILT BY HADLEY WE HAVE NO INFO. ON DATE OF REBUILD OR WORK COMPLETED. The item “Hardinge HLV-H Super Precision Tool Room Lathe Sony 2 Axis Digital Read Outs” is in sale since Monday, February 12, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Metalworking Lathes”. The seller is “jimmers0_0″ and is located in Hopkins, Minnesota. This item can be shipped to United States.

• Type: Engine
• Make: Hardinge
• Model: HLV-H
• Serial Number: HLV-H 4424
• Swing Over Bed: Less than 10”
• Distance Between Centers: 10” – 20”
• Hole Thru Spindle: 1-1/4″
• Country/Region of Manufacture: United States
• Highest Spindle Speed (RPM): 2501 – 3000

]]> https://usedlathetooling.info/hardinge-hlv-h-super-precision-tool-room-lathe-sony-2-axis-digital-read-outs/feed/ 0 https://usedlathetooling.info/sharp-26x120-engine-lathe-gap-bed-inch-metric-digital-read-out-tooling-taiwan/ https://usedlathetooling.info/sharp-26x120-engine-lathe-gap-bed-inch-metric-digital-read-out-tooling-taiwan/#comments Fri, 26 May 2017 06:49:16 +0000 http://usedlathetooling.info/sharp-26x120-engine-lathe-gap-bed-inch-metric-digital-read-out-tooling-taiwan/








Sharp 26/37″ x 120″ Gap Bed Engine Lathe with 3 1/8 Spindle Bore, 2-Axis Acu-Rite Digital Read Out, Aloris Tool Post, 3-Jaw Chuck, 4-Jaw Chuck, (2) Steady Rests & Face Plate. One owner machine from maintenance shop in excellent condition. 26/37 x 120 Sharp Gap Bed Geared Head Engine Lathe, Model 26120, S/N L30104, New 12/1985. Swing Over Bed 26. Swing In Gap 37. Swing over Cross Slide 17. Spindle HP 10 HP 220/440/3/60. Speeds (12) 14 1500 RPM. Threads Inch 2 56 TPI. Tail Stock Taper 5MT. Acu-Rite 2-Axis Digital Read Out. 16 4 Jaw Chuck. 15 3 Jaw Chuck. Aloris Quick Change Tool Post w/1 Holder. Roller Tip Steady Rest. 12 Brass Tip Steady Rest. 2 Speed Tail Stock. Loading onto your flatbed truck at no additional charge. We can help finding competetive trucking rates to your destination. The item “SHARP 26×120 ENGINE LATHE GAP BED INCH METRIC DIGITAL READ OUT TOOLING TAIWAN” is in sale since Monday, May 22, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking Tooling\Equipment Specific Tooling\Lathe”. The seller is “muke2000″ and is located in Lebanon, New Jersey. This item can’t be shipped, the buyer must pick up the item.

• Brand: SHARP
• Model: 26120
• MPN: Does Not Apply
• Country/Region of Manufacture: Taiwan

]]> https://usedlathetooling.info/sharp-26x120-engine-lathe-gap-bed-inch-metric-digital-read-out-tooling-taiwan/feed/ 0