July 31, 2016
This Cross Slide tool is in good condition. It does have a few rust spots mainly on. I think you can see it in the pictures. It’s made by American Watch Tool Company Pat. The only thing I noticed that would detract a little from it is, a couple. Of the screw heads have been […]
July 31, 2016
Koch for 8mm lathe reversible 4 jaw chuck. Koch is very high quality and is the Number 1 company in germany for the best chucks / best concentricity. Check this used chuck on concentricity, in very good order. And open all parts and clean / new. The Diameter / Ø is about 55 mm. Groove […]
July 29, 2016
Lorch for 6mm lathe 6 jaw chuck. Check this used chuck on concentricity, in very good order. The Diameter, Ø is about 60 mm. Groove / slot is about 1,1mm for holding fixture on headstock. Please also note small print. International buyers (only outside EU). The item “Lorch 6mm lathe 6 jaw chuck Ø 60 […]
July 26, 2016
July 24, 2016
This is a complete unit , universal tool post grinder, installed on the lathe w/ a T bolt, comes w/ wreches and a few sizes of T bolts. Runs fine has all parts and lots of wheels. One of the latches on the box does not works well, but all else is functional and ok. […]
July 24, 2016
Watchmakers lathe 8mm, American Watch Tool Co. There are a few areas where the paint has chipped but overall in very good condition. Please see pictures for the best description and if you have any questions please ask and I will do my best to answer. The item “Watchmakers lathe 8mm, American Watch Tool Co” […]
July 21, 2016
The lathe measures 12 wide. Overall in good condition, but has not been tested. The item “VINTAGE DERBYSHIRE WATCHMAKER JEWELERS LATHE REPAIR TOOL PARTS WithCOLLETS” is in sale since Monday, July 18, 2016. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Tools & Repair Kits”. The seller is “midwestestate” […]
July 19, 2016
An excellent Lorch watchmakers 8 mm lathe with a set of collets compound cross slide and T rest tool post as well as the switching and motor and drive speed reduction. This is a ready to use machine that will be a great tool for the hobbyist or the professional repairer. The lathe is working […]
July 15, 2016
July 15, 2016
Flume Rollifit Watchmakers Pivot Polishing Tool. Includes Jacot style pivot lathe of unknown manufacture. This unit is well used. At some point the previous owner attempted to repaint it with gray hammer-tone paint. 5 pivot rest units included. Barrel diameter 8.8 mm. 1 dual end slotted rest with slot sizes 38, 40, 42, 44, 46, […]