July 17, 2017
I JUST FINISHED THIS ONE YESTERDAY. BEEN WORKING ON IT FOR 2 WEEKS AND DON’T LET THE LOOKS FOOL YOU ITS 100% READY TO GO. THIS IS A SOUTH BEND HEAVY 10 TOOLROOM LATHE. 10″ SWING X 28″ CENTERS. 3/4 HP 220 3 PH MOTOR. NEW 6″ 3 JAW CHUCK WITH A 2 1/4″-8 BACK. […]
July 15, 2017
General Info: Stock #: YT-171010 Location: Stone Mountain, GA Brand: Victor Model: 618EM Serial #: 8504036 Approx. 5C/4° Taper Hole Through Spindle: 1-1/4″ Variable Spindle Speeds: 130 – 3000 RPM Swing Over Bed: 11″ Swing Over Cross Slide: 6″ Swing Over Carriage: 9″ Distance Between Centers: 18″ Lead Screw Diameter: 1″ – 8 TPI Carriage […]
June 21, 2017
I JUST FINISHED THIS ONE YESTERDAY. BEEN WORKING ON IT FOR 2 WEEKS AND DON’T LET THE LOOKS FOOL YOU ITS 100% READY TO GO. THIS IS A SOUTH BEND HEAVY 10 TOOLROOM LATHE. 10″ SWING X 28″ CENTERS. 3/4 HP 220 3 PH MOTOR. NEW 6″ 3 JAW CHUCK WITH A 2 1/4″-8 BACK. […]
June 20, 2017
13/18 x 38 Supermax Gap Bed Engine Lathe. 1987 W/ IN/MM Threading, Steady Rest. See a video of the Saw running at the below link. Swing Over the Bed.. Swing Over the Gap. Swing over the Carriage. W/ out live center. Spindle Bore 1.5. 220 Volt/ 3 PH. Tailstock Spindle Taper #3 MT Taper. Tailstock […]
May 14, 2017
I JUST FINISHED THIS ONE YESTERDAY. BEEN WORKING ON IT FOR 2 WEEKS AND DON’T LET THE LOOKS FOOL YOU ITS 100% READY TO GO. THIS IS A SOUTH BEND HEAVY 10 TOOLROOM LATHE. 10″ SWING X 28″ CENTERS. 3/4 HP 220 3 PH MOTOR. NEW 6″ 3 JAW CHUCK WITH A 2 1/4″-8 BACK. […]
April 22, 2017
General Info: Stock #: CD-161282 Location: Stone Mountain, GA Brand: Logan Model: 820 Approx. 1000 Motor HP: 1.5 Electrical: 230V / 1PH Equipped With: Various tooling shown in photos, Variable Frequency Drive Additional Info: The lathe has been tested and is in working condition, below is a video of it in operation. We are glad […]
April 16, 2017
Runs good, has taper attachment (missing bed clamp), ELSR (electric lead screw reverse), coolant pump(Gusher Brand), work light & aluminum. Includes the following tooling/. 8 1/4 Cushman 4 jaw chuck (no key). 8 1/4 Horton 3 Jaw chuck (no key and a little rough). 6 Cushman 3 jaw (no key). Hardinge-Sjogren 5C Speed Chuck (good […]
April 15, 2017
Colchester Mascot 2000 Lathe 18″x 60″ and 28″x 60″ with Gap removed. Included with this lathe is quick change Toolpost plus holders shown in pictures and Live Centers shown in Pictures. This lathe has Newall DRO’s however the two cables on X and Z will need to be replaced. Newall has the cables in stock. […]
March 28, 2017
Monarch EE Toolroom Lathe. 25-4000 RPM Spindle Speed. Hardened ASA 3 – D-1 camlock spindle nose with 1-13/32 (35mm) hole through spindle. Quick clamping tailstock with dead center spindle – #2 Morse Taper. Threads: 3 to 184 TPI. Right and Left Hand Threading. Drive was updated by monarch in 8-88. 3 Phase 460 V. Production […]
December 8, 2016
This lathe is in great condition. DRO Collets, Tool Board and Tooling included. Can send more pics. Can load on truck. Most of these items have never been used. I added more pictures of these items. I have more pictures that I can send if need. The item “#HLV-H HARDINGE Super Precision Toolroom Lathe 3 […]