May 27, 2017
A Used but good working condition Hardinge 5c collet chuck lathe with 8 position turret tool post. The machine comes with the tool holders seen and several more. Has the rear parting holder which is a great accessory that’s hard to find. This machine is still under power and in good working condition. The feeds […]
April 30, 2017
Used, Hardinge DV-59 Lathe Variable Speed With Hardinge Turret & Hardinge Tool Cross Slide. This older lathe come out of a lab room from University of California San Diego. Comes as shown in pictures. Addditional charges will apply to residential address, liftgate service and restricted areas. Be specific about your needs to get an accurate […]
February 23, 2017
NICE LOT OF 5/8 SHANK TURRET TOOLING W/ NICE BROWN & SHARPE KNURLING TOOL… BROWN & SHARPE , HARDINGE , BROOKFIELD , ETC.. The item “BROWN & SHARP 5/8 SHANK TURRET TOOLS HARDINGE LATHE MACHINIST TOOLS” is in sale since Wednesday, February 15, 2017. This item is in the category “Business & Industrial\Manufacturing & Metalworking\Metalworking […]
January 26, 2017
January 24, 2017
This is an assorted lot of components removed from a Hardinge HC Chucker precision lathe The major component of interest is the cross slide and tool post. Of course you could use it for its original purpose, but it could be very useful as a precision tool holder and adjuster if you were creating something […]
October 10, 2016
September 7, 2016
This is a solid heavy tailstock turret tool post. Comes with a countersink bit and one drill/tap holder. It has an MT2 arbor for fitting to the tailstock as shown but it will also clamp directly to the tailstock barrel on a South Bend Heavy Ten lathe for a far sturdier setup. It is complete […]
August 4, 2016
This tooling has a 14 millimeter diameter shank, and I have seen these tailstocks bored out to take standard 5? 8 Brown & Sharpe tooling, as well as bushings made to use the 1/2 inch Levin turret tooling as well. But if you want the proper original tooling to use in your turret, here is […]
April 25, 2016
2000 Nakamura-Tome WT-250 CNC Lathe. X Travels 7.68. Z Travels 23.62. Bar Capacity 2.55. Max Turning Diameter 9.84. Max Turning Length 17.12. Max Bar Size Left Spindle 2.5. Max Bar Size Right Spindle 2. Spindle Speed 4500 RPM. Live Tool Speed 6000 RPM. ATC 12 per turret. Fanuc 18i-T CNC Controls. Located in NORTH CAROLINA. […]