CNC-Lathe-2002-MORI-SEIKI-ZL-200SMC-WITH-LIVE-TOOLING-Video-01-brwb

June 23, 2022

CNC Lathe 2002 MORI SEIKI ZL-200SMC WITH LIVE TOOLING Video

CNC Lathe: 2002 MORI SEIKI ZL-200SMC WITH LIVE TOOLING. THIS IS A DUAL TURRET CNC TURNING CENTER With LIVE TOOLING and SUB-SPINDLE. Questions: Please look up Swissturn5 online so we can discuss. Mazak 15MS, same size as Mazak quick turn with live milling. Cnc lathe with live milling and Mazak sub spindle. Mori Seiki ZL […]

Haas-ST-10-CNC-Lathe-2014-Barfeeder-Tooling-Video-Clean-01-rvca

August 17, 2021

Haas ST-10 CNC Lathe, 2014 Barfeeder, Tooling, Video, Clean

Haas ST-10 CNC Lathe, 2014 – Barfeeder, Tooling, Video, Clean! We are pleased to offer the following for your consideration. CNC Lathe – CNC. Swing Over Front Apron: 25.25. Swing Over Cross Slide: 16.25. Maximum Cutting Diameter: 14. Maximum Cutting Length: 14. X Axis Travel: 7.88. Z Axis Travel: 14. Rapid Traverse Rate X Axis: […]

Must-See-General-260-12-Variable-Speed-Wood-Lathe-Fully-Tooled-video-01-wtn

June 2, 2021

Must See! General 260 12 Variable Speed Wood Lathe Fully Tooled! (video)

GENERAL 260 12 VARIABLE SPEED WOOD LATHE FULLY TOOLED! Item will only include what is shown in the photos. Most of our items are used and may show signs of wear and/or need calibration; we test the basic functional features of our items and describe the physical condition to the best of our knowledge. CHECK […]

Doosan-Daewoo-Puma-230MS-CNC-Lathe-2001-Live-Tooling-Sub-Spindle-Video-C-A-01-uns

September 28, 2020

Doosan/Daewoo Puma 230MS CNC Lathe, 2001 Live Tooling, Sub Spindle, Video, C A

Doosan/Daewoo Puma 230MS CNC Lathe, 2001 – Live Tooling, Sub Spindle, Video, C A. We are pleased to offer the following for your consideration. CNC Lathe – CNC. Max Turning Diameter: 11.42. Max Turning Length: 19.37. Swing Over Bed: 21.65. X Axis Travel: 8.07. Z Axis Travel: 22.83. Spindle Bore: 2.625. Spindle Speed: 4,500 RPM. […]

Mazak-Super-Quick-Turn-15-Univ-CNC-Lathe-1993-Tooling-Included-Video-Availa-01-arm

July 21, 2020

Mazak Super Quick Turn 15 Univ. CNC Lathe, 1993 Tooling Included, Video Availa

Mazak Super Quick Turn 15 Univ. CNC Lathe, 1993 – Tooling Included, Video Availa. We are pleased to offer the following for your consideration. CNC Lathe – CNC. Max Swing: 17.3. Max Turning Length: 19.69. Maximum Cutting Diameter: 11.81. Swing Over Bed: 10. Maximum Bar Capacity: 2. X-Axis Travel: 7.09. Z-Axis Travel: 20.08. Spindle Nose […]

Daewoo-250m-Cnc-Lathe-Live-Tooling-Tailstock-10-Chuck-Chip-Conveyor-Video-01-cx

May 13, 2020

Daewoo 250m Cnc Lathe, Live Tooling, Tailstock 10 Chuck, Chip Conveyor, Video

WISCONSIN METALWORKING MACHINERY ID#10346. 22.44 SWING OVER CARRIAGE……….. 11.1 Z AXIS TRAVEL…………….. 26.77 C AXIS INDEXING…………… RAPID TRAVERSE RATE X AXIS…. 800 IPM RAPID TRAVERSE RATE Z AXIS…. 945 IPM SPINDLE NOSE……………… 3.54 MAIN SPINDLE SPEEDS……….. 35 – 3,500 RPM SPINDLE MOTOR…………….. 30 HP TURRET CAP. 12 STATION TURRET LIVE TOOLING MOTOR………… 5 HP LIVE […]

Clausing-Colchester-13-x-40-Lathe-with-Tooling-Video-in-Description-01-loi

March 4, 2020

Clausing Colchester 13 x 40 Lathe with Tooling Video in Description

Clausing Colchester 13″ x 40″ Lathe. Distance between centers: 40. 16 Spindle speeds: from 30 to 2,500 rpm. Thru hole: 1.5. 10″ 4 Jaw chuck & 6 5/16″ 3 jaw chuck. Spindle nose: 4 D-1 Camlock. Thread dial on carriage. Steady rest w/ 5.5 thru hole. Slide out coolant tank w/ 1/3hp pump in rear […]

1 2 5