January 17, 2017
I NOT SURE OF THE MAKER OF THIS LATHE I BOUGHT IT IN GERMANY IT’S DATE FROM 1930’S SOME OF THE ACCESSORIES HAVE WOLF JAHN ON THEM!!! THE LATHE IS IN GOOD WORKING ORDER THE CROSS SIDE AS SOME BACKLASH. BURNERD 3 JAW CHUCK 2 SET OF JAW. WOLF JAHN 6 JAW CHUCK. SCREWCUTTING ATTACHMENT […]
January 16, 2017
All round excellence condition little mill/drill, 2 1/2. 70 mm center height, will take 8 mm ww collets. Diameter of the rotary table. 4 3/4, 120 mm. This mill/drill is about 107 year old and stood the test of time and still is a grant little mill. High quality mill look good two and is […]
January 13, 2017
General Description : What is being offered for sale is a highly collectible antique watchmakers lathe/mandrel set-up. The mandrel was most likely made during the first half of the 1800s. The drive gearing is most unusual. The mandrel comes with (1) compound slide, (2), tailstock with adapted universal chuck, (3) runner for tailstock, (4) filing […]
January 11, 2017
This is a very rare item. It is inscribed Wolf & Jahn and will probably fit other 6mm lathes i. It operates smoothly and is in good condition. The overall finish is good as can be seen from the pictures. This 6 jaw chuck could be a very useful addition to your lathe – expanding […]
January 10, 2017
This is a very rare item. It is not inscribed with the makers name (not unusual) but has been checked out on a Wolf & Jahn lathe which it fits perfectly. This tailstock will fit similar Geneva pattern i. 20mm diameter beds with the flat to the rear i. The pump action works smoothly. The […]
January 9, 2017
This is a very important tool that should not be missing in any watchmakers workshop. The tool has hardly been used and is essential when you work with a Jacot tool and watchmakers lathe. The contact jaws and the adjustable measuring table make it possible to measure accurately and easily the thickness and run-out of […]
January 5, 2017
Three jaw self centering chuck, 1 off set dog leg, face plate and saw blade adapter for use in place of chuck. Three tool post, one doesn’t have the base plate. Drill chuck, 1 live center, 2 dead centers for tail stock. Machinist vise for use with milling attachment. The indexing and dividing attachment. Some […]
December 26, 2016
This is a very important tool that should not be missing in any watchmakers workshop. The tool has hardly been used and is essential when you work with a Jacot tool and watchmakers lathe. The contact jaws and the adjustable measuring table make it possible to measure accurately and easily the thickness and run-out of […]
December 22, 2016
It comes in it’s original box with certificate and certificate number. This is a rare opportunity, I myself have only very rarely seen this type of tool and especially in such great condition. A beautiful tool and must have for every watchmaker and collector of special watchmaker tools. Please check my other auctions. The item […]
December 20, 2016
This is a very important tool that should not be missing in any watchmakers workshop. The tool has hardly been used and is essential when you work with a Jacot tool and watchmakers lathe. The contact jaws and the adjustable measuring table make it possible to measure accurately and easily the thickness and run-out of […]