August 7, 2021
Watchmakers lathe tailstock universal runner, Jacot drum, drill plate , alignment runner and drill holding runner for polishing pivots and repivotting arbors. The drill holding runner takes standard watchmaker spade drills with 1.5 mm stub. The universal runner is 7mm in diameter so will fit most Lorch, Wolf Jahn, Bergeon etc lathes. Please check the […]
August 7, 2021
The tool is made of the best quality. It is necessary to polish the screwheads of wrist and pocket watches. This is a must have for every watchmaker. Item offered as seen on pictures. Please check my other auctions. The item “Original Lorch&Schmidt Screwhead polishing machine watchmakers lathe very good” is in sale since Friday, […]
August 6, 2021
Vintage Watchmakers Jewelers lathe Collets Centers 53 Piece USA And Paulson. Set is used but in very good condition. Most collets are marked Made in USA. Some are marked Paulson Germany. Wood box has a crack in the lid. The item “Vintage 8mm Watchmakers Jewelers lathe Collets Centers 53 Piece USA And Paulson” is in […]
August 6, 2021
Here is a Used Vintage Marshall Watchmakers 3 Axis Compound Cross Slide. It is from a Jeweler’s Estate Sale. All 3 Move Freely will No Slop as well as Changing the Cutting Angle from Right 50 Degrees to 0 to Left 50 Degrees. It is in Like New Condition. I Know Nothing else About this […]
August 4, 2021
Vintage 8 mm WW MARSHALL PEERLESS USA WATCHMAKER’S LATHE, the base, headstock, and tailstock MATCHING NUMBERS. The paint and plating is about 85% intact. The lathe is in very good clean working condition, comes as pictured with. The tailstock has the micrometer or. And accept ER11 collets (7 included). The machine has enough power to […]
August 2, 2021
You can work on pivots from 0.04mm to 1.2mm. This is a beautiful tool to work with as it is 100% fully functional. This is a very good brand for working with Jacot tools. Offered as seen on pictures. Please check my other auctions. The item “Menz Jacot tool watchmakers lathe very good condition” is […]
July 25, 2021
For sale here is a rare walnut watchmakers lathe box for a 6 mm lathe. Regarding the sizes , it was almost for sure made by or for Lorch. This is a very large (about 42.5 x 30 x 15.5 cm) box , intended to take up three D-bed’s. The holders on the inside of […]
July 22, 2021
This listing is for a Watchmakers Pivot Polisher. Lathe attachment with polishing lap and idler pulley. The Tool is in good working condition. Cosmetic condition is as shown in the pictures. Pictures are part of my description. Please inspect all of them carefully. This is as accurate of a. As I can give. I will […]
July 20, 2021
Watchmakers Horological Tool – Screw Polishing Lathe, Antique in Box. Please see photographs for condition and size. The tool has a fault – the end of the piece that holds the collets has sheared, when you undo the tool, the end is loose, but still functions as it should holding the collets. I imagine an […]
July 16, 2021
38 Pieces Boley 8mm Watchmakers Lathe Collets. Various Sizes And Lengths. Please Note, There Are Short And Long Collets With Different Head Shapes. Not All Pieces Will Fit One Lathe. Row 1 – 4,4,4,6,6,6,6,8,9,9. Row 2 – 11,12,12,12,13,14,14,17. Row 3 – 20,25,26,26,28,29. Row 4 – 30,30,32,36,37,38,39. Row 5 – 41,44,45,46,47,48. Row 6 – 50. Thank […]