Schaublin 150 tool room lathe, made in Switzerland. Latest model Heidenhain DRO. (Lista cabinet included) Features include starwheel 2 speed tail stock, rear tool block, Tripan (Swiss) tool holder system. Lever type collet closer and B32 collets, steady rest, follow rest, various chucks and taper attachment. Runs quiet and smooth. Backlash of cross is. Input voltage 380, 3 phase. Loading onto your truck at no charge. Export crating available for extra charge. Above bed: 150 mm. Above tool slide: 33 mm. Distance between centres: 600 mm. Above bed: 340 mm. Above carriage: 177 mm. In spindle bore: 40 mm. In B32 collet: 24 mm. In stationary or travelling steady: 100 mm. Spindle nose: D 1-4 CAMLOCK. Spindle internal taper: No 5 MORSE. Spindle speeds, drive by variator: 55-3000 rpm. Spindle speeds with headstock reduction unit engaged: 55-750 rpm. Size of tools: 20×20 mm. Swivelling tool slide: 100 mm. 1 turn of the handwheel is equivalent to a traverse of: 2 mm. Carriage cross slide: 180 mm. 1 turn of the handwheel is equivalent to a traverse of: 3 mm. Accuracy of reading on handwheel verniers: 0,01 mm. 24 longitudinal and transverse normal feeds: 0,025-0,35 mm/rev. 24 longitudinal and transverse fine feeds: 0,015-0,21 mm/rev. 36 screwcutting feeds for metric pitches: 0,25-14 mm. 36 screwcutting feeds for English pitches: 112-1½ tpi. 38 screwcutting feeds for module pitches: 0,125-7,5 modules. Longitudinal rapid automatic feed: 4,0 m/min. Spindle internal taper: No 3 MORSE. Longitudinal stroke of spindle: 120 mm. Transverse adjustment: ±10 mm. Rapid-feed motor: 0,35/1500 kW-rpm. Coolant-system motor: 0,15-3000 kW-rpm. Lubrication-system motor: 0,15-3000 kW-rpm. Total electric power installed: 4,65 kW. Capacity of coolant tank: 29 litres.