Watchmaker’s WW lathe Boley&Leinen distributed by. Refurbished in fine working condition. Both heads has fine smooth rotation without backlash. You will got: all what You see on photos, set of Boley collets 15 pcs. 500W motor with regulator 1-24 VOLTS (110-220V input) for speed control. Added 22 of May. We have replaced drawbar by other one with better stick. Paulson “Supreme” 8 mm. Built in Germany by Leinen, the Paulson was a lightly modified Model WW80 built for distribution by Henry Paulson & Co. Of 131 South Wabash Avenue, Chicago 3, U. The exact specification is not certain, but Paulson are known to have required a “micro-feed” tailstock spindle with a micrometer dial engraved with metric divisions (and for the spindle to take collets); an improved tailstock-to-bed clamping arrangement; dust-proof headstock spindle oil reservoirs and a headstock pulley with three rings of indexing holes: 50, 56 and 90. Of standard WW specification, with a 50 mm centre height, the flat-topped, bevelled-edged bed could be had as a single pedestal mount – in which case it was 280 mm (11″) long – or as a 400 mm (18″) long-bed version with two feet. The usual central T-slot was provided to secure headstock, slide rest, tailstock and other accessories. The headstock spindle, to take 8 mm collets, used a traditional watchmakers’ lathe assembly of double-cone bearings in hardened and lapped steel with lubrication by simple but capped oilers. At least two versions of the screw-feed tailstock were produced: an early version with a conventional full-length screw and small micrometer dial and a later one where the spindle could be pushed freely though the screw-feed unit and then locked to it in the required position – this type having a much larger, easier-to-read engraved ring. As an option the lathe could be supplied with a tailstock having a simple “runner” (push spindle) assembly. A wide range of accessories was offered, all drawn from the standard Leinen range, that included a multi-speed countershaft, lever-action collet closer, lever-action tailstock, a saw table, dividing head, compound screw-feed slide rest, vertical milling slide, high-speed milling and grinding attachments, a mandrel faceplate and the usual selection of collets, cutters, wax chucks, arbors, centres, etc. Beautifully finished in nickel plate with chemical blacking of small fastenings, the lathe was manufactured to a very high standard and today is comparatively rare. The item “Watchmaker’s WW lathe Boley Leinen (Paulson Supreme 8 mm)” is in sale since Wednesday, May 20, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Tools & Repair Kits”. The seller is “anth_1974″ and is located in Samara, default. This item can be shipped worldwide.
- MPN: Does Not Apply
- Brand: Leinen
- Type of Tool: Lathe
