August 8, 2016
August 8, 2016
Levin Crossfeed for Precision Lathe
A used but undamaged X-Y feed for WW type precision lathes. It shows previous use but everything works smoothly. Most of the oil/age stains are on the upper plate which has a number of very small drill point marks and two larger ones. One of these has obliterated part of the Levin part or model […]
August 7, 2016
THEMAC J-35 Tool Post Grinder
I have not used this grinder, I bought it due to a project that I ended up not needed it on. It runs good and looks like it was used very little. It is perfect for a small lathe… 9″ to 13″ swing. The carrying case has a missing handle and latch. Please review the […]
August 7, 2016
Koch 8mm lathe 6 jaw chuck Ø 55 mm, watchmakers tool Bergeon, Boley, Lorch
Koch for 8mm lathe 6 jaw chuck. Koch is very high quality and is the Number 1 company in germany for the best chucks / best concentricity. Check this used chuck on concentricity, in very good order. And open all parts and clean / new. The Diameter / Ø is about 55 mm. Groove / […]
August 6, 2016
EMCO Unimat SL1000 American Edelstaal Lathe, Mill, Accessories, Stepping motors
Nice machine with extras. Belts, tooling, tool holders, small vise, boring bar and tools. The item “EMCO Unimat SL1000 American Edelstaal Lathe, Mill, Accessories, Stepping motors” is in sale since Friday, August 05, 2016. This item is in the category “Home & Garden\Tools\Power Tools\Lathes & Accessories”. The seller is “broland2012″ and is located in Peyton, […]
August 6, 2016
Oneway wood lathe chuck
One way stronghold wood lathe chuck. Comes with 2 set jaw and screw adapter from the backside. Let me know if you have any question. Also please take a look at all of the pictures I post for condition. The item “Oneway wood lathe chuck” is in sale since Saturday, July 30, 2016. This item […]
August 5, 2016
Unimat Miniature Machining Lathe SL-1000
I bought it from an old jeweler thinking I would teach myself how to use it but never did. It appears in good, clean, cosmetic condition and is no old or mildew odors. I can’t tell you if all the parts are there; it came with what you see in the pictures. See pics for […]
August 5, 2016
Hardinge HLV Tool Room Lathe
For sale; a used Hardinge HLV narrow bed tool room lathe, Serial number HLV-B 489-3. Spindle nose is a 4 degree taper. Also, I do not guarantee that said machine will perform to factory standards or specifications of accuracy. This machine was manufactured in 1954 (approximate date) and may not satisfy current or future safety […]
August 4, 2016
Group of Turret Tooling for Schaublin 70 Watchmakers or Instrument Lathe
This tooling has a 14 millimeter diameter shank, and I have seen these tailstocks bored out to take standard 5? 8 Brown & Sharpe tooling, as well as bushings made to use the 1/2 inch Levin turret tooling as well. But if you want the proper original tooling to use in your turret, here is […]
August 4, 2016
JF / Bergeon 8mm lathe reversible 3 jaw chuck Ø 73 mm, watchmaker Boley, Lorch
JF / Bergeon for 8mm lathe reversible 3 jaw chuck. Check this used chuck on concentricity, in very good order. And open all parts and clean / new. The Diameter / Ø is about 73 mm. The Groove / slot is about 1,9mm for holding fixture on headstock. Please also note small print. International buyers […]